NFS

1290774 - Phoenix Contact - MACX MCR-EX-AP-RPSS-I-IR

Ex i-Feed and input signal conditioner with 2 limit value relays, feeds 2 or 3-conductor measuring transducer, transmits 1:1 passive or active 0 mA / 4 mA ... 20 mA input signals and has 2 configurable limit value outputs. HART-transparent, Standard configuration, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Screw connection

vergleichen

443,65 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

1290776 - Phoenix Contact - MACX MCR-EX-AP-RPSS-I-IR-SP

Ex i-Feed and input signal conditioner with 2 limit value relays, feeds 2 or 3-conductor measuring transducer, transmits 1:1 passive or active 0 mA / 4 mA ... 20 mA input signals and has 2 configurable limit value outputs. HART-transparent, Standard configuration, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 2, Push-in connection

vergleichen

443,65 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

1291193 - Phoenix Contact - MACX MCR-EX-AP-RPSS-I-I-SP

Ex i-Feed and input signal conditioner feeds 2-, 3- and 4-conductor measuring transducer and transmits 1:1 passive or active 0 mA / 4 mA ... 20 mA Ex i input signals as active non Ex i output signal. HART-transparent, Standard configuration, 3-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection

vergleichen

402,30 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

1291894 - Phoenix Contact - MACX MCR-EX-AP-RTD-RTD

Ex i-Resistance isolator for intrinsically safe operation of Pt 100 resistance thermometers in 2, 3, or 4-conductor technology and resistance-type sensors. The values measured at the Ex i input are transmitted 1:1 to the non Ex i output. Standard configuration, 3-way isolation, Screw connection

vergleichen

454,00 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

1291955 - Phoenix Contact - MACX MCR-EX-AP-RTD-RTD-SP

Ex i-Resistance isolator for intrinsically safe operation of Pt 100 resistance thermometers in 2, 3, or 4-conductor technology and resistance-type sensors. The values measured at the Ex i input are transmitted 1:1 to the non Ex i output. Standard configuration, 3-way isolation, Push-in connection

vergleichen

454,00 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

2865421 - Phoenix Contact - MACX MCR-EX-IDS-2I-2I

2-channel Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 4-way electrical isolation, line fault detection, SIL 2 (SC3) in accordance with IEC 61508, screw connection.

vergleichen

415,41 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

2908060 - Phoenix Contact - MACX MCR-EX-IDS-I-I

Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, screw connection.

vergleichen

275,11 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

1291186 - Phoenix Contact - MACX MCR-EX-AP-2SD-25-35-LP-SP

Ex i-Solenoid driver for intrinsically safe activation of Ex i solenoid valves, alarm transmitters, or displays installed in potentially explosive areas. Standard configuration, Loop-powered, 4-way isolation, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection

vergleichen

310,83 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

2908062 - Phoenix Contact - MACX MCR-EX-IDS-I-I-SP

Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, Push-in connection.

vergleichen

275,11 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb

NFS

2908065 - Phoenix Contact - MACX MCR-IDS-2I-2I

2-channel output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA ... 20 mA signals to a load in the safe area. 4-way electrical isolation, line fault detection, SIL 2 (SC3) in accordance with IEC 61508, screw connection.

vergleichen

413,67 USD Preis

Ausverkauft - Auftragsrückstand

- +

In den Warenkorb