DK20/49 PEPPERL+FUCHS - Part number: 418085
Ausverkauft - Auftragsrückstand
Beim Hersteller zu bestellen
576,99 USD

Importsteuern ausgeschlossen

bitte einloggen

DK20/49 PEPPERL+FUCHS - Part number: 418085

PEPPERL+FUCHS

Print mark contrast sensor DK20/49 DK20/49 Diffuse mode sensor for recording any print mark Static TEACH-IN: automatic switching threshold adaptation Optical system exchangeable by 90° 30 µs response time, suitable for extremely rapid scanning processes 3 emitter colors: green, red and blue Print mark contrast sensor DK20/49 DK20/49 Diffuse mode sensor for recording any print mark Static TEACH-IN: automatic switching threshold adaptation Optical system exchangeable by 90° 30 µs response time, suitable for extremely rapid scanning processes 3 emitter colors: green, red and blue

MPNs 418085, PEP418085, DK20/49
HS-Code 90318000
Weight 0.2 kg

Das Produktbild dient nur zur Veranschaulichung.
Das Ursprungsland, der HS-Code und die Beschreibung werden vom Hersteller angegeben und können ohne vorherige Ankündigung geändert werden. Aus diesem Grund kann PLC-City nicht für Abweichungen verantwortlich gemacht werden.
Von PLC-CITY® verkauft und aus Italien versandt

Wir akzeptieren viele Zahlungsmethoden: Banküberweisung (SEPA, ACH), Debit/ Kreditkarten (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, Link by Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WeChatPay.
Weitere Informationen zu unseren Zahlungsmethoden

Dieses Produkt ist durch eine 12 Monaten Garantie abgedeckt, gültig für Herstellungsfehler oder Fehlfunktionen. Die Garantie deckt keine Schäden ab, die durch unsachgemäßen Gebrauch oder versehentliche Beschädigung verursacht wurden.
Erfahren Sie mehr über unsere Garantie

Rückgaben bedürfen einer vorherigen Genehmigung und werden als Store-Gutschrift erstattet. Vorbestellte Artikel sind ausgeschlossen.

Sehen Sie sich unsere Rückgabebedingungen an

576,99 USD

Importsteuern ausgeschlossen

bitte einloggen
Von PLC-CITY® verkauft und aus Italien versandt
Wir sind ein Spezialpartner von PEPPERL+FUCHS
Kostenloser Expressversand nach Vereinigte Staaten
Loader...
Alle Versanddienste anzeigen
Fordern Sie ein Angebot an, um das Lieferdatum zu kennen

Wir akzeptieren viele Zahlungsmethoden: Banküberweisung (SEPA, ACH), Debit/ Kreditkarten (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, Link by Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WeChatPay.
Weitere Informationen zu unseren Zahlungsmethoden

Dieses Produkt ist durch eine 12 Monaten Garantie abgedeckt, gültig für Herstellungsfehler oder Fehlfunktionen. Die Garantie deckt keine Schäden ab, die durch unsachgemäßen Gebrauch oder versehentliche Beschädigung verursacht wurden.
Erfahren Sie mehr über unsere Garantie

Rückgaben bedürfen einer vorherigen Genehmigung und werden als Store-Gutschrift erstattet. Vorbestellte Artikel sind ausgeschlossen.

Sehen Sie sich unsere Rückgabebedingungen an

Holen Sie sich jetzt Ihr persönliches Angebot

Ein engagierter Vertriebsmitarbeiter hilft Ihnen, den besten Preis und die beste Lieferzeit anzubieten.

bitte einloggen

Fordern Sie Ihren maßgeschneiderten technischen Service an

Verlassen Sie sich auf unser fachkundiges technisches Team für eine Reihe von personalisierten Dienstleistungen: Reparatur, Programmierung, Wartung und vieles mehr.

Produktinformationen

Beschreibung

Datasheet excerpt: Technical data of  DK20/49 Product Description Print mark contrast sensor, 9.5 mm detection range, RGB light, light/dark on, external Teach-in, NPN output, PNP output, M12 plug General specifications Sensor range9.5 mm ± 3 mm Light sourceLED Light typeVisible green/red/blue, modulated light Light spot representationrectangular 1 mm x 4 mm , Angle deviationmax. ± 3° Ambient light limit Continuous light7000 Lux Teach-Instatic Teach-In Functional safety related parameters MTTFd650 a Mission Time (TM)20 a Diagnostic Coverage (DC)0 % Indicators/operating means Function indicatorLED yellow; switching operation: lights up if print mark is detectedTeach-In operation: flashing slowlyalarm display: flashing quickly, if no safe operation is possible Control elementsTeach-In key Electrical specifications Operating voltage10 ... 30 V DC Ripple10 % No-load supply current≤ 70 mA Input Function inputTeach-In input Output Switching typelight/dark on switchable, results from the order of the Teach-In Signal output1 PNP and 1 NPN short-circuit protected, open collector, synchronized-switching Switching voltagePNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V Switching currentmax. 200 mA Switching frequency16.5 kHz Response time30 µs Conformity Product standardEN 60947-5-2 Compliance with standards and directives Standard conformity Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions Approvals and certificates EAC conformityTR CU 020/2011 UL approvalcULus Listed , Class 2 power source CCC approvalCCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature-20 ... 60 °C (-4 ... 140 °F) Storage temperature-20 ... 75 °C (-4 ... 167 °F) Mechanical specifications Housing width33 mm Housing height85.6 mm Housing depth60.8 mm Degree of protectionIP67 Connection5-pin, M12 x 1 connector Material HousingPC (glass-fiber-reinforced Makrolon) Optical faceglass Mass200 g Classifications SystemClasscode ECLASS 11.027270906 ECLASS 10.0.127270906 ECLASS 9.027270906 ECLASS 8.027270906 ECLASS 5.127270906 ETIM 8.0EC001820 ETIM 7.0EC001820 ETIM 6.0EC001820 ETIM 5.0EC001820 UNSPSC 12.139121528 Datasheet excerpt: Technical data of  DK20/49 Product Description Print mark contrast sensor, 9.5 mm detection range, RGB light, light/dark on, external Teach-in, NPN output, PNP output, M12 plug General specifications Sensor range9.5 mm ± 3 mm Light sourceLED Light typeVisible green/red/blue, modulated light Light spot representationrectangular 1 mm x 4 mm , Angle deviationmax. ± 3° Ambient light limit Continuous light7000 Lux Teach-Instatic Teach-In Functional safety related parameters MTTFd650 a Mission Time (TM)20 a Diagnostic Coverage (DC)0 % Indicators/operating means Function indicatorLED yellow; switching operation: lights up if print mark is detectedTeach-In operation: flashing slowlyalarm display: flashing quickly, if no safe operation is possible Control elementsTeach-In key Electrical specifications Operating voltage10 ... 30 V DC Ripple10 % No-load supply current≤ 70 mA Input Function inputTeach-In input Output Switching typelight/dark on switchable, results from the order of the Teach-In Signal output1 PNP and 1 NPN short-circuit protected, open collector, synchronized-switching Switching voltagePNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V Switching currentmax. 200 mA Switching frequency16.5 kHz Response time30 µs Conformity Product standardEN 60947-5-2 Compliance with standards and directives Standard conformity Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions Approvals and certificates EAC conformityTR CU 020/2011 UL approvalcULus Listed , Class 2 power source CCC approvalCCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature-20 ... 60 °C (-4 ... 140 °F) Storage temperature-20 ... 75 °C (-4 ... 167 °F) Mechanical specifications Housing width33 mm Housing height85.6 mm Housing depth60.8 mm Degree of protectionIP67 Connection5-pin, M12 x 1 connector Material HousingPC (glass-fiber-reinforced Makrolon) Optical faceglass Mass200 g Classifications SystemClasscode ECLASS 11.027270906 ECLASS 10.0.127270906 ECLASS 9.027270906 ECLASS 8.027270906 ECLASS 5.127270906 ETIM 8.0EC001820 ETIM 7.0EC001820 ETIM 6.0EC001820 ETIM 5.0EC001820 UNSPSC 12.139121528

Unser Unternehmen Bewertungen