ML100-8-H-100/115/120/162 PEPPERL+FUCHS - Part number: 243927

Datasheet excerpt: Technical data of  ML100-8-H-100/115/120/162 Product Description Diffuse mode sensor with special light spots for detecting PCBs, background suppression, miniature design, 100 mm detection range, red light, light/dark on, PNP outputs, fixed cable General specifications Detection range20 ... 100 mm Detection range min.10 ... 25 mm Detection range max.25 ... 100 mm Adjustment range25 ... 100 mm Reference targetstandard white, 100 mm x 100 mm Light sourceLED Light typemodulated visible red light Polarization filterno Black-white difference (6 %/90 %)< 20 % Diameter of the light spot3 light spots, spotsize 4 mm at a distance of 50 mm, spots are 8 mm apart; spotsize 2.5 mm at a distance of 80 mm, spots are 12 mm apart; spotsize 4 mm at a distance of 100 mm, spots are 15 mm apart (outer spot to outer spot) Optical facefrontal Ambient light limitEN 60947-5-2:2007+A1:2012 Functional safety related parameters MTTFd1100 a Mission Time (TM)20 a Diagnostic Coverage (DC)0 % Indicators/operating means Operation indicatorLED green: power on Function indicatorLED yellow: lights when object is detected , flashes when in adjustment mode Control elementsSensing range adjuster Control elementsLight-on/dark-on changeover switch Electrical specifications Operating voltage10 ... 30 V DC Ripplemax. 10 % No-load supply current< 15 mA Output Switching typeThe switching type of the sensor is adjustable. The default setting is: light-on Signal output2 PNP outputs, independent short-circuit protected , reverse polarity protected , open collector transistor Switching voltagemax. 30 V DC Switching currentmax. 100 mA , resistive load Voltage drop≤ 1.5 V DC Switching frequency500 Hz Response time1 ms Conformity Product standardEN 60947-5-2 Approvals and certificates UL approvalcULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure CCC approvalCCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature-30 ... 60 °C (-22 ... 140 °F) Storage temperature-40 ... 70 °C (-40 ... 158 °F) Mechanical specifications Housing width11 mm Housing height31 mm Housing depth20 mm Degree of protectionIP67 Connection2 m fixed cable Material HousingPC (Polycarbonate) Optical facePMMA Mass50 g Tightening torque, fastening screws0.6 Nm Cable length2 m Classifications SystemClasscode ECLASS 11.027270904 ECLASS 10.0.127270904 ECLASS 9.027270904 ECLASS 8.027270904 ECLASS 5.127270904 ETIM 8.0EC002719 ETIM 7.0EC002719 ETIM 6.0EC002719 ETIM 5.0EC002719 UNSPSC 12.139121528 Datasheet excerpt: Technical data of  ML100-8-H-100/115/120/162 Product Description Diffuse mode sensor with special light spots for detecting PCBs, background suppression, miniature design, 100 mm detection range, red light, light/dark on, PNP outputs, fixed cable General specifications Detection range20 ... 100 mm Detection range min.10 ... 25 mm Detection range max.25 ... 100 mm Adjustment range25 ... 100 mm Reference targetstandard white, 100 mm x 100 mm Light sourceLED Light typemodulated visible red light Polarization filterno Black-white difference (6 %/90 %)< 20 % Diameter of the light spot3 light spots, spotsize 4 mm at a distance of 50 mm, spots are 8 mm apart; spotsize 2.5 mm at a distance of 80 mm, spots are 12 mm apart; spotsize 4 mm at a distance of 100 mm, spots are 15 mm apart (outer spot to outer spot) Optical facefrontal Ambient light limitEN 60947-5-2:2007+A1:2012 Functional safety related parameters MTTFd1100 a Mission Time (TM)20 a Diagnostic Coverage (DC)0 % Indicators/operating means Operation indicatorLED green: power on Function indicatorLED yellow: lights when object is detected , flashes when in adjustment mode Control elementsSensing range adjuster Control elementsLight-on/dark-on changeover switch Electrical specifications Operating voltage10 ... 30 V DC Ripplemax. 10 % No-load supply current< 15 mA Output Switching typeThe switching type of the sensor is adjustable. The default setting is: light-on Signal output2 PNP outputs, independent short-circuit protected , reverse polarity protected , open collector transistor Switching voltagemax. 30 V DC Switching currentmax. 100 mA , resistive load Voltage drop≤ 1.5 V DC Switching frequency500 Hz Response time1 ms Conformity Product standardEN 60947-5-2 Approvals and certificates UL approvalcULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure CCC approvalCCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature-30 ... 60 °C (-22 ... 140 °F) Storage temperature-40 ... 70 °C (-40 ... 158 °F) Mechanical specifications Housing width11 mm Housing height31 mm Housing depth20 mm Degree of protectionIP67 Connection2 m fixed cable Material HousingPC (Polycarbonate) Optical facePMMA Mass50 g Tightening torque, fastening screws0.6 Nm Cable length2 m Classifications SystemClasscode ECLASS 11.027270904 ECLASS 10.0.127270904 ECLASS 9.027270904 ECLASS 8.027270904 ECLASS 5.127270904 ETIM 8.0EC002719 ETIM 7.0EC002719 ETIM 6.0EC002719 ETIM 5.0EC002719 UNSPSC 12.139121528