NFS

1050192 Phoenix Contact - Temperature measuring transducer - MACX MCR-RTD-I

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, screw connection, SIL, 3-way electrical isolation, standard configuration.

comparer

258,87 GBP Prix

Rupture de stock - Backorder

- +

Ajouter au panier

NFS

2907707 Phoenix Contact - Loop-powered isolators - MACX MCR-SL-2I-2I-HV-ILP-SP

Two-channel input loop-powered 2-way isolator with increased cut-off voltage and plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in connection technology.

comparer

Disponible sur demande

Demander un Devis

NFS

2924087 Phoenix Contact - Isolation amplifier - MACX MCR-EX-SL-2NAM-RO-SP

Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.

comparer

153,66 GBP Prix

Rupture de stock - Backorder

- +

Ajouter au panier

NFS

2924074 Phoenix Contact - Isolation amplifier - MACX MCR-EX-SL-NAM-2T-SP

Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.

comparer

142,35 GBP Prix

Rupture de stock - Backorder

- +

Ajouter au panier

NFS

2924061 Phoenix Contact - Isolation amplifier - MACX MCR-EX-SL-NAM-2RO-SP

Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.

comparer

141,55 GBP Prix

Rupture de stock - Backorder

- +

Ajouter au panier

NFS

2924045 Phoenix Contact - Isolation amplifier - MACX MCR-EX-SL-NAM-R-SP

Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via a relay output (PDT contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.

comparer

123,04 GBP Prix

Rupture de stock - Backorder

- +

Ajouter au panier

NFS

2924032 Phoenix Contact - Output signal conditioner - MACX MCR-EX-SL-IDSI-I-SP

Ex i output signal conditioner, HART. Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508, spring-cage connection.

comparer

Disponible sur demande

Demander un Devis

NFS

2924029 Phoenix Contact - Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP-SP

Ex i repeater power supply and input isolating amplifier, HART Sends fed or active 0/4-20 mA signals from the Ex area to a load (active or passive) to the safe area. Electrical 3-way isolation; SIL 2, wide range power supply.

comparer

244,94 GBP Prix

Rupture de stock - Backorder

- +

Ajouter au panier

NFS

2924016 Phoenix Contact - Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-SP

Ex i repeater power supply and input signal conditioner, HART. Transmits supplied or active 0/4 - 20 mA signals from the hazardous area to a load (active or passive) in the safe area. 3-way electrical isolation; SIL 2 according to IEC 61508, with push-in connection

comparer

207,85 GBP Prix

Rupture de stock - Backorder

- +

Ajouter au panier

NFS

2908856 Phoenix Contact - Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-1S-SP

Ex i measuring transducer supply conditioner and input signal conditioner, only output 1 is HART-transparent. Transmits supplied or active signals from the Ex area with electrical isolation to two loads. SIL 2 in accordance with IEC 61508, Push-in connection.

comparer

301,02 GBP Prix

Rupture de stock - Backorder

- +

Ajouter au panier