IQT1-FP-IO-V1 PEPPERL+FUCHS - Part number: 299929

Datasheet excerpt: Technical data of  IQT1-FP-IO-V1 Product Description HF read/write station with IO-Link in accordance with ISO 15693 General specifications Operating frequency13.56 MHz Transfer rate26 kBit/s Sensing range Read distance0 ... 130 mm Write distance0 ... 130 mm Widthmax. 100 mm UL File NumberE87056 Functional safety related parameters MTTFd280 a Mission Time (TM)10 a Diagnostic Coverage (DC)0 % Indicators/operating means LED red/greenGreen: power onFlashing green: IO-Link communicationFlashing red/green: IO-Link communication interrupted LED blue/yellowBlue: Write/read attempt performedYellow: Read/write tag detected Electrical specifications Rated operating voltage20 ... 30 V DC , ripple 10 %SS No-load supply current≤ 70 mA (at 24 V DC) Power consumption≤ 2 W Interface Interface typeIO-Link IO-Link revision1.1 Vendor ID1 (0x0001) Device ID4194561 (0x400101) Data transfer rateCOM3 (230.4 kbits/s) Min. cycle time4 ms SIO mode supportno Compatible master port typeClass A Class B Directive conformity Radio equipment Directive 2014/53/EUEN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 RoHS Directive 2011/65/EU (RoHS)IEC/EN 63000 Standard conformity Degree of protectionEN 60529 Communication interfaceIEC 61131-9 / IO-Link V1.1.2 RFIDISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 Approvals and certificates UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. MIC approvalAC-21098 Radio approvalUSA: FCC IREIQT1FPIOCanada: 7037A-IQT1FPIO Ambient conditions Ambient temperature-25 ... 70 °C (-13 ... 158 °F) Storage temperature-40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Housing length108.5 mm Housing width80 mm Housing height40 mm Degree of protectionIP67 Connectionconnector M12 x 1 Material HousingPBT Basediecast aluminum Encapsulation compoundCY 221/HY 2966 Installation Distance between two heads≥ 150 mm Mass380 g Classifications SystemClasscode ECLASS 11.027280401 ECLASS 10.0.127280401 ECLASS 9.027280401 ECLASS 8.027280401 ECLASS 5.127280401 ETIM 8.0EC002998 ETIM 7.0EC002998 ETIM 6.0EC002998 ETIM 5.0EC002998 UNSPSC 12.143211710 Datasheet excerpt: Technical data of  IQT1-FP-IO-V1 Product Description HF read/write station with IO-Link in accordance with ISO 15693 General specifications Operating frequency13.56 MHz Transfer rate26 kBit/s Sensing range Read distance0 ... 130 mm Write distance0 ... 130 mm Widthmax. 100 mm UL File NumberE87056 Functional safety related parameters MTTFd280 a Mission Time (TM)10 a Diagnostic Coverage (DC)0 % Indicators/operating means LED red/greenGreen: power onFlashing green: IO-Link communicationFlashing red/green: IO-Link communication interrupted LED blue/yellowBlue: Write/read attempt performedYellow: Read/write tag detected Electrical specifications Rated operating voltage20 ... 30 V DC , ripple 10 %SS No-load supply current≤ 70 mA (at 24 V DC) Power consumption≤ 2 W Interface Interface typeIO-Link IO-Link revision1.1 Vendor ID1 (0x0001) Device ID4194561 (0x400101) Data transfer rateCOM3 (230.4 kbits/s) Min. cycle time4 ms SIO mode supportno Compatible master port typeClass A Class B Directive conformity Radio equipment Directive 2014/53/EUEN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 RoHS Directive 2011/65/EU (RoHS)IEC/EN 63000 Standard conformity Degree of protectionEN 60529 Communication interfaceIEC 61131-9 / IO-Link V1.1.2 RFIDISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 Approvals and certificates UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. MIC approvalAC-21098 Radio approvalUSA: FCC IREIQT1FPIOCanada: 7037A-IQT1FPIO Ambient conditions Ambient temperature-25 ... 70 °C (-13 ... 158 °F) Storage temperature-40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Housing length108.5 mm Housing width80 mm Housing height40 mm Degree of protectionIP67 Connectionconnector M12 x 1 Material HousingPBT Basediecast aluminum Encapsulation compoundCY 221/HY 2966 Installation Distance between two heads≥ 150 mm Mass380 g Classifications SystemClasscode ECLASS 11.027280401 ECLASS 10.0.127280401 ECLASS 9.027280401 ECLASS 8.027280401 ECLASS 5.127280401 ETIM 8.0EC002998 ETIM 7.0EC002998 ETIM 6.0EC002998 ETIM 5.0EC002998 UNSPSC 12.143211710