Lighting control system components

Световой модулятор для управления драйверами светодиодов, входное напряжение 110 В ... 277 В, 2 релейных выхода, ток нагрузки 8 A, может управлять драйверами светодиодов в количестве до 8 , аналоговый интерфейс 10 В, измерение токов нагрузки

сравнивать

178,08 USD

нет в наличии - Дозаказ

NFS

EEN002 HAGER Light sensor for flush-mounted twilight switch

The flush-mounted twilight sensor measures ambient brightness and is connected to EEN100/101 twilight switches. Installation in watertight boxes is recommended. Maximum distance from the switch: 100 m. Precise and discreet solution for automating outdoor lights, shop windows and blinds according to natural light.

сравнивать

24,51 USD

нет в наличии - Дозаказ

NFS

EEN003 HAGER Light sensor for wall-mounted twilight switch IP55

The wall-mounted twilight sensor EEN003 detects ambient light and enables automatic activation of EEN100/101 switches. To ensure optimal performance, it must be installed in environments protected from dust and humidity. It can be connected to the module up to 100 m away. Perfect for efficiently managing outdoor lighting, shop window lighting or blind automation.

сравнивать

19,93 USD

нет в наличии - Дозаказ

NFS

EEN003W HAGER Wireless wall-mounted photocell IP54 for EGN100/200/400

The wall-mounted wireless brightness sensor, compatible with EGN100/200/400 time switches, detects light changes and transmits by quicklink radio (868-870 MHz) every 15 minutes or with 20% variations. Powered by 2 AAA lithium batteries with life up to 5 years. Resistant to outdoor agents (IP55) and with radio range up to 100 m in open field. Ideal solution for smart and wireless automation.

сравнивать

предоставляется по запросу

Запросить цену

NFS

20108 - Beghelli - Smart Radio Receiver

Interface radio device, powered at 230vac, which integrates a relay capable of piloting lighting devices and other electrical loads. The device is equipped with antenna and can be inserted in any type of non -shielded box or box 503 (space of 1 single module) Maximum controlled load 260W. The home automation radio receiver must be associated with one or more radio transmitters or an SD LGFM plant to implement the corresponding commands.

сравнивать

55,74 USD

нет в наличии - Дозаказ

минимальный объем заказа - 50