Atexor ATEX/IECEx Hand Lamps: MICA IL-800

<div class="container-fluid"><h3>MICA® IL-800: dual-mode ATEX / IECEx hand lamp for hazardous areas</h3><p>The Atexor MICA® IL-800 Zone 0 and Zone 1 are all-purpose, high quality hand lamps specially designed for use in Explosion Hazardous Areas. A handy dual-mode switch lets you choose between extending operating time or boosting light output. IL-800, like other MICA® handlamps, is designed and manufactured in our own factory in Finland.</p><h4>Certified performance for hazardous areas</h4><p>This heavy duty hand lamp features three high-power CREE LEDs and delivers up to 200 lumens guaranteed over LED lifetime. It carries full ATEX / IECEx certifications for Zone 0 and Zone 1 areas, with temperature classification T4 and IP67 housing for reliable operation in demanding environments.</p><h4>Robust construction and key features</h4><ul><li>Three high-power CREE LEDs</li><li>Up to 200 lumens guaranteed over LED lifetime</li><li>Optional emergency function (EM) and blink mode (BK)</li><li>ATEX / IECEx certification for Zone 0 and Zone 1 areas</li><li>Temperature classification T4</li><li>IP67 housing</li></ul><h4>Durability and battery protection</h4><p>Featuring a robust, dissipative construction and a tempered 5 mm lens, this hand lamp will not let you down when it is most needed. As an added bonus, the MICA® IL-800 floats if dropped in water. Advanced electronics prevent deep discharge of the battery, and when battery is getting low, the beam starts to blink at 15 second intervals.</p><h4>Emergency function and accessories</h4><p>You can also order both IL-800 models with our highly recommended Emergency Function (EM). When the MICA® IL-800EM is in the charger, the hand lamp turns on automatically if the main power supply is lost. The EM function ensures you get a power supply warning and enough light to react safely. We see our EM function used everywhere, from oil rigs to refineries and a wide range of industrial and military scenarios. IL-800 Zone1 EM and IL-800 Zone0 EM are special models and we hope that you will take this into account when ordering. The IL-800 is compatible with Atexor MICA® ILC4 chargers that can recharge an empty battery in less than six hours, even in +40 °C. For charging several IL-800 hand lamps at once, you can install a MICA® charging rack. Strong shoulder strap is included to all MICA IL-series lights.</p></div> <div class="container-fluid"><h3>MICA® IL-800: dual-mode ATEX / IECEx hand lamp for hazardous areas</h3><p>The Atexor MICA® IL-800 Zone 0 and Zone 1 are all-purpose, high quality hand lamps specially designed for use in Explosion Hazardous Areas. A handy dual-mode switch lets you choose between extending operating time or boosting light output. IL-800, like other MICA® handlamps, is designed and manufactured in our own factory in Finland.</p><h4>Certified performance for hazardous areas</h4><p>This heavy duty hand lamp features three high-power CREE LEDs and delivers up to 200 lumens guaranteed over LED lifetime. It carries full ATEX / IECEx certifications for Zone 0 and Zone 1 areas, with temperature classification T4 and IP67 housing for reliable operation in demanding environments.</p><h4>Robust construction and key features</h4><ul><li>Three high-power CREE LEDs</li><li>Up to 200 lumens guaranteed over LED lifetime</li><li>Optional emergency function (EM) and blink mode (BK)</li><li>ATEX / IECEx certification for Zone 0 and Zone 1 areas</li><li>Temperature classification T4</li><li>IP67 housing</li></ul><h4>Durability and battery protection</h4><p>Featuring a robust, dissipative construction and a tempered 5 mm lens, this hand lamp will not let you down when it is most needed. As an added bonus, the MICA® IL-800 floats if dropped in water. Advanced electronics prevent deep discharge of the battery, and when battery is getting low, the beam starts to blink at 15 second intervals.</p><h4>Emergency function and accessories</h4><p>You can also order both IL-800 models with our highly recommended Emergency Function (EM). When the MICA® IL-800EM is in the charger, the hand lamp turns on automatically if the main power supply is lost. The EM function ensures you get a power supply warning and enough light to react safely. We see our EM function used everywhere, from oil rigs to refineries and a wide range of industrial and military scenarios. IL-800 Zone1 EM and IL-800 Zone0 EM are special models and we hope that you will take this into account when ordering. The IL-800 is compatible with Atexor MICA® ILC4 chargers that can recharge an empty battery in less than six hours, even in +40 °C. For charging several IL-800 hand lamps at once, you can install a MICA® charging rack. Strong shoulder strap is included to all MICA IL-series lights.</p></div>