Atexor Portable Lighting Accessories: SLAM Click'n Temporary work light brackets and fittings

<div class="container-fluid"><h3>SLAM® Click’n Fix</h3><h4>Main features</h4><ul><li>Temporary work light brackets and fittings for portable Ex lighting solutions</li><li>Tested according to ATEX, INMETRO and IECEx requirements</li><li>Easy and fast mounting</li><li>Exceptionally wide range of bracket types</li><li>Brackets supplied with securing screws</li></ul><p>SLAM® Click’n Fix is the easiest fixing system for portable Ex lighting solutions. No lighting system is complete without Ex certified brackets and fixings to ensure every part of the system remains safe to use. Atexor SLAM® brackets are available for most surfaces, including uneven surfaces, and are designed for durability and ease of use.</p><h4>SLAM® Magnetic Bracket</h4><p>The Atexor SLAM® Magnetic Bracket is a strong, fully dissipative magnetic fixing option that does not require separate bonding wires. These brackets are also useful for cable and wiring control: cables can simply be looped through a pair of brackets to keep them off the floor. Additional flexibility in the bracket design helps with challenging metal surfaces such as corrugated steel. The magnetic bracket is rigidly connected to the magnet base and is sold in pairs.</p><h4>SLAM® Magnetic Bracket Loose</h4><p>The swivelling magnet bracket allows the bracket to adapt to uneven surfaces, flexing in different horizontal or vertical directions. For a strong and secure fit in challenging spaces with slanted or curved surfaces, the loose magnetic bracket is the ideal choice.</p><h4>SLAM® Single Bracket</h4><p>When magnets are not an option, the Atexor SLAM® Single Bracket provides a reliable way to install Ex work lights on surfaces such as wood or concrete. This Ex certified solution allows brackets to be firmly attached with sturdy screws. Once installed, SLAM® work lights can be easily attached and removed.</p><h4>SLAM® Scaffold Bracket</h4><p>The Atexor SLAM® Scaffold Bracket is ideally suited to painting jobs and similar work where scaffolding is set up in an Explosion Hazardous Area. This dissipative bracket includes a pipe connector with sharp teeth for gripping and a convenient tightening strap for fast mounting.</p><h4>SLAM® Unistrut Bracket</h4><p>The Atexor SLAM® Unistrut Bracket is a bespoke fixing option for industries where Unistrut® tracks are used. The bracket is specifically designed for straightforward installation on Unistrut tracks.</p><h4>SLAM® Protector</h4><p>The original SLAM® Protector is an effective cover for end caps and Ex sockets. Keeping Ex certified equipment such as SLAM® portable lights clean is critical for worker safety and for extending the lifetime of the lights. It is ideal for painting jobs, designed to fit all SLAM® Hornets and supplied in sets of 10 pieces.</p><h4>SLAM® S-Hook Kit and S-Hook</h4><p>Atexor SLAM® S-Hooks allow SLAM® Ex luminaires to be hung quickly and easily. The hooks are fully dissipative and have been tested and verified as safe for use in Explosion Hazardous Areas. One kit includes two hooks, while the single SLAM® S-Hook is a practical addition for safe cable arrangements.</p><h4>SLAM® Hanging Straps</h4><p>Atexor SLAM® Hanging Straps are flexible, extremely lightweight and suitable for use in a wide range of work sites. They can be easily adjusted to fit pipes, masts and supports of different dimensions, and are considerably easier to attach and remove after a job than conventional ties. Two pieces are supplied as standard with each SLAM® Hornet and Neos.</p></div> <div class="container-fluid"><h3>SLAM® Click’n Fix</h3><h4>Main features</h4><ul><li>Temporary work light brackets and fittings for portable Ex lighting solutions</li><li>Tested according to ATEX, INMETRO and IECEx requirements</li><li>Easy and fast mounting</li><li>Exceptionally wide range of bracket types</li><li>Brackets supplied with securing screws</li></ul><p>SLAM® Click’n Fix is the easiest fixing system for portable Ex lighting solutions. No lighting system is complete without Ex certified brackets and fixings to ensure every part of the system remains safe to use. Atexor SLAM® brackets are available for most surfaces, including uneven surfaces, and are designed for durability and ease of use.</p><h4>SLAM® Magnetic Bracket</h4><p>The Atexor SLAM® Magnetic Bracket is a strong, fully dissipative magnetic fixing option that does not require separate bonding wires. These brackets are also useful for cable and wiring control: cables can simply be looped through a pair of brackets to keep them off the floor. Additional flexibility in the bracket design helps with challenging metal surfaces such as corrugated steel. The magnetic bracket is rigidly connected to the magnet base and is sold in pairs.</p><h4>SLAM® Magnetic Bracket Loose</h4><p>The swivelling magnet bracket allows the bracket to adapt to uneven surfaces, flexing in different horizontal or vertical directions. For a strong and secure fit in challenging spaces with slanted or curved surfaces, the loose magnetic bracket is the ideal choice.</p><h4>SLAM® Single Bracket</h4><p>When magnets are not an option, the Atexor SLAM® Single Bracket provides a reliable way to install Ex work lights on surfaces such as wood or concrete. This Ex certified solution allows brackets to be firmly attached with sturdy screws. Once installed, SLAM® work lights can be easily attached and removed.</p><h4>SLAM® Scaffold Bracket</h4><p>The Atexor SLAM® Scaffold Bracket is ideally suited to painting jobs and similar work where scaffolding is set up in an Explosion Hazardous Area. This dissipative bracket includes a pipe connector with sharp teeth for gripping and a convenient tightening strap for fast mounting.</p><h4>SLAM® Unistrut Bracket</h4><p>The Atexor SLAM® Unistrut Bracket is a bespoke fixing option for industries where Unistrut® tracks are used. The bracket is specifically designed for straightforward installation on Unistrut tracks.</p><h4>SLAM® Protector</h4><p>The original SLAM® Protector is an effective cover for end caps and Ex sockets. Keeping Ex certified equipment such as SLAM® portable lights clean is critical for worker safety and for extending the lifetime of the lights. It is ideal for painting jobs, designed to fit all SLAM® Hornets and supplied in sets of 10 pieces.</p><h4>SLAM® S-Hook Kit and S-Hook</h4><p>Atexor SLAM® S-Hooks allow SLAM® Ex luminaires to be hung quickly and easily. The hooks are fully dissipative and have been tested and verified as safe for use in Explosion Hazardous Areas. One kit includes two hooks, while the single SLAM® S-Hook is a practical addition for safe cable arrangements.</p><h4>SLAM® Hanging Straps</h4><p>Atexor SLAM® Hanging Straps are flexible, extremely lightweight and suitable for use in a wide range of work sites. They can be easily adjusted to fit pipes, masts and supports of different dimensions, and are considerably easier to attach and remove after a job than conventional ties. Two pieces are supplied as standard with each SLAM® Hornet and Neos.</p></div>