XBRIRS485ET - CABUR

The Xbri series consists of two different types of interconnection bridge. The XBRERS485EET device is a gateway that allows you to connect the modbus -rto devices on an RS485 network to an Ethernet network based on Modbus-TCP. The XBRERS485ET and XBRERS48WI devices are two bridges that allow you to connect devices with RS485 communication (with any protocol) to an Ethernet network (Ethernet 1/1 Base T) based on TCP/IP protocol stack or to create transparent links to the user for Means of standard computer networks. The communication from Ethernet to RS485 takes place through a virtual communication door. The Ethernet communication speed can be set to 1mbit/s or 1mbit/s. Through the Telnet interface it is possible to configure the parameters of the device (IP address, subnet mask, etc.). The Xbri series consists of two different types of interconnection bridge. The XBRERS485EET device is a gateway that allows you to connect the modbus -rto devices on an RS485 network to an Ethernet network based on Modbus-TCP. The XBRERS485ET and XBRERS48WI devices are two bridges that allow you to connect devices with RS485 communication (with any protocol) to an Ethernet network (Ethernet 1/1 Base T) based on TCP/IP protocol stack or to create transparent links to the user for Means of standard computer networks. The communication from Ethernet to RS485 takes place through a virtual communication door. The Ethernet communication speed can be set to 1mbit/s or 1mbit/s. Through the Telnet interface it is possible to configure the parameters of the device (IP address, subnet mask, etc.).