184-10248 HellermannTyton - HTWD-PN-120X80-PVC-GY

Narrow slots are ideal for small diameter cables. Smooth edges protect installers from injury. Slats can be removed without leaving sharp burrs using pre-cut points. Other pre-punched points at the base of the walls allow parts of the side walls to be removed without leaving sharp edges. Raised mounting points for safe and easy attachment of cable locks and other accessories before wiring. Cable clamps and other accessories leave no protunding points below the surface of the wireway. The covers are easy to install and remove, remaining fixed in place even when mounted vertically or subject to vibration. The covers are flush with the side of the gutter, allowing them to be positioned tightly and contiguously. Gutter slats higher than 80 are provided with an additional retention pawl. The holes at the base are made according to DIN EN 50085. HTWD-PN wireways are used to guide and protect cables in control panels and switchboards. Narrow slots are ideal for small diameter cables. Smooth edges protect installers from injury. Slats can be removed without leaving sharp burrs using pre-cut points. Other pre-punched points at the base of the walls allow parts of the side walls to be removed without leaving sharp edges. Raised mounting points for safe and easy attachment of cable locks and other accessories before wiring. Cable clamps and other accessories leave no protunding points below the surface of the wireway. The covers are easy to install and remove, remaining fixed in place even when mounted vertically or subject to vibration. The covers are flush with the side of the gutter, allowing them to be positioned tightly and contiguously. Gutter slats higher than 80 are provided with an additional retention pawl. The holes at the base are made according to DIN EN 50085. HTWD-PN wireways are used to guide and protect cables in control panels and switchboards.