102-00150 HellermannTyton - Power_pack_ATS_flex_24V-MET-BU

Automatic clamping system (requires power supply unit). Power supply 3080 - Input: 240/150 VAC, 50/60 Hz; Output: 48 VDC, max 100 W. Waste-free quality banding with diameter up to 100 mm with flush cutting. Supplied with jaws for 3 different diameters: 30, 50, 80 mm, solution with 100 mm jaws as an accessory upon request. Cycle time from 1.1 to 2.4 sec, depending on binding diameter. Beam diameter detected mechanically. Can be used with suspended stand or bench-mounted. Can be integrated into a fully automated production line. Binding of anchors with Ø 50 mm special jaw. Autotool System ATS flex is an automatic tying system designed to speed up tying operations without leaving waste. It can be quickly adapted to different bundle diameters (up to 100 mm) thanks to three different jaw sizes that are easily interchangeable. With the ATS flex bench mounting kit or the ATS flex suspended stand, Autoool System ATS flex is suitable for static or flexible applications. The Autotool System ATS flex can also be integrated into fully automated production lines. Special jaws are designed for tie-down of anchors and baseplates in fully automated systems. Automatic clamping system (requires power supply unit). Power supply 3080 - Input: 240/150 VAC, 50/60 Hz; Output: 48 VDC, max 100 W. Waste-free quality banding with diameter up to 100 mm with flush cutting. Supplied with jaws for 3 different diameters: 30, 50, 80 mm, solution with 100 mm jaws as an accessory upon request. Cycle time from 1.1 to 2.4 sec, depending on binding diameter. Beam diameter detected mechanically. Can be used with suspended stand or bench-mounted. Can be integrated into a fully automated production line. Binding of anchors with Ø 50 mm special jaw. Autotool System ATS flex is an automatic tying system designed to speed up tying operations without leaving waste. It can be quickly adapted to different bundle diameters (up to 100 mm) thanks to three different jaw sizes that are easily interchangeable. With the ATS flex bench mounting kit or the ATS flex suspended stand, Autoool System ATS flex is suitable for static or flexible applications. The Autotool System ATS flex can also be integrated into fully automated production lines. Special jaws are designed for tie-down of anchors and baseplates in fully automated systems.