VBA-4E3A-G20-ZEL/M1L-P2 PEPPERL+FUCHS - Part number: 70130648

Datasheet excerpt: Technical data of  VBA-4E3A-G20-ZEL/M1L-P2 Product Description G20 motor control module for Interroll EC310, Interoll EC5000 24V AI, Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC General specifications Node typeA/B node AS-Interface specificationV3.0 Required gateway specification≥ V2.1 ProfileS-7.A.E IO code7 ID codeA ID1 code6 ID2 codeE UL File NumberE223772 "For use in NFPA 79 Applications only" MTBF98 a Compatible roller motorsInterroll EC310, Interroll EC5000 24V AI (20W / 35W / 50W), Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC Indicators/operating means LED FAULTerror display; LED redred: communication error or address is 0red flashing: overload of sensor supply or external auxiliary voltage UAUX missing LED ERRMotor fault: 2 LED yellow LED PWRAS-Interface voltage; green LEDgreen: voltage OKgreen flashing: address 0 or sensor supply overload or external auxiliary voltage UAUX missing LED AUXext. auxiliary voltage UAUX; dual LED green/redgreen: voltage OKred: reverse voltage LED INswitching state (input); 2 LED yellow LED FUSEMotor power supply; 2 green LEDs LED DIRMotor rotation direction; yellow LED LED MOTMotor active; 2 yellow LEDs Electrical specifications Auxiliary voltage (output)18 ... 30 VDC PELV Rated operating voltage26.5 ... 31.6 V from AS-Interface Rated operating current≤ 35 mA Input Number/Type2 Inputs for 3-wire sensors (PNP), DC Supplyfrom external auxiliary voltage UAUX Current loading capacity500 mA , overload and short-circuit protected Input current≤ 8 mA (limited internally) Switching pointaccording to DIN EN 61131-2 0 (undamped) ≤ 0.5 mA1 (damped) ≥ 2.0 mA Signal delay< 1 ms (input/AS-Interface) Input filter2 ms Output Number/Type2 outputs for DC roller motors (MOT1, MOT2) Supplyfrom external auxiliary voltage UAUX Current3.5 A continuous current , 5 A (<2 s) , max. 7.5 A (<0,3 s) per motor Overload protectionfuse , I2t = 53.7 A2s Velocity signal1.4 … 13 V at no-load Ri = 5.6 kΩ, RLOAD ≥ 35 kΩ Control via parameter P2:0 Rotation direction signalOff / ≥ (UAUX - 1.0 V) at no-load Ri = 5.6 kΩ, RLOAD ≥ 5 kΩ AS-Interface data bit D2 = 0: UD = Off Motor faultDigital input NPN, U0 = 3.3 V, Ri = 52 kΩ 0 (no error) ≥ 40 µA 1 (error) ≤ 30 µA Directive conformity Electromagnetic compatibility Directive 2014/30/EUEN 62026-2:2013 Standard conformity Degree of protectionEN 60529:2000 Fieldbus standardEN 62026-2:2013 InputEN 61131-2:2007 Emitted interferenceEN 61000-6-4:2007 AS-InterfaceEN 62026-2:2013 Noise immunityEN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 Ambient conditions Ambient temperature-25 ... 60 °C (-13 ... 140 °F) Storage temperature-25 ... 85 °C (-13 ... 185 °F) Mechanical specifications Degree of protectionIP54 according to EN 60529 ConnectionAS-Interface, AUX: Insulation piercing technologyYellow flat cable/black flat cableInputs/outputs: M8 round plug connector in accordance with EN 61076-2-104Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded)Matching connector: LM004-Gx1-A or similarOutputs: NF005-SS1-B (5-pin, bushing contacts, snap lock, B-coded).Matching connector: NM005-Sx1-B or similar Mass220 g Mounting2 clips with ∅ 8 mm drill hole Cable length1 m NoteThe flat cable routing is designed for 100 actuation cycles Classifications SystemClasscode ECLASS 11.027242604 ECLASS 10.0.127242604 ECLASS 9.027242604 ECLASS 8.027242604 ECLASS 5.127242604 ETIM 8.0EC001599 ETIM 7.0EC001599 ETIM 6.0EC001599 ETIM 5.0EC001599 UNSPSC 12.139121535 Datasheet excerpt: Technical data of  VBA-4E3A-G20-ZEL/M1L-P2 Product Description G20 motor control module for Interroll EC310, Interoll EC5000 24V AI, Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC General specifications Node typeA/B node AS-Interface specificationV3.0 Required gateway specification≥ V2.1 ProfileS-7.A.E IO code7 ID codeA ID1 code6 ID2 codeE UL File NumberE223772 "For use in NFPA 79 Applications only" MTBF98 a Compatible roller motorsInterroll EC310, Interroll EC5000 24V AI (20W / 35W / 50W), Rulmeca BL3, Itoh Denki PM500XK, Itoh Denki PM500XC Indicators/operating means LED FAULTerror display; LED redred: communication error or address is 0red flashing: overload of sensor supply or external auxiliary voltage UAUX missing LED ERRMotor fault: 2 LED yellow LED PWRAS-Interface voltage; green LEDgreen: voltage OKgreen flashing: address 0 or sensor supply overload or external auxiliary voltage UAUX missing LED AUXext. auxiliary voltage UAUX; dual LED green/redgreen: voltage OKred: reverse voltage LED INswitching state (input); 2 LED yellow LED FUSEMotor power supply; 2 green LEDs LED DIRMotor rotation direction; yellow LED LED MOTMotor active; 2 yellow LEDs Electrical specifications Auxiliary voltage (output)18 ... 30 VDC PELV Rated operating voltage26.5 ... 31.6 V from AS-Interface Rated operating current≤ 35 mA Input Number/Type2 Inputs for 3-wire sensors (PNP), DC Supplyfrom external auxiliary voltage UAUX Current loading capacity500 mA , overload and short-circuit protected Input current≤ 8 mA (limited internally) Switching pointaccording to DIN EN 61131-2 0 (undamped) ≤ 0.5 mA1 (damped) ≥ 2.0 mA Signal delay< 1 ms (input/AS-Interface) Input filter2 ms Output Number/Type2 outputs for DC roller motors (MOT1, MOT2) Supplyfrom external auxiliary voltage UAUX Current3.5 A continuous current , 5 A (<2 s) , max. 7.5 A (<0,3 s) per motor Overload protectionfuse , I2t = 53.7 A2s Velocity signal1.4 … 13 V at no-load Ri = 5.6 kΩ, RLOAD ≥ 35 kΩ Control via parameter P2:0 Rotation direction signalOff / ≥ (UAUX - 1.0 V) at no-load Ri = 5.6 kΩ, RLOAD ≥ 5 kΩ AS-Interface data bit D2 = 0: UD = Off Motor faultDigital input NPN, U0 = 3.3 V, Ri = 52 kΩ 0 (no error) ≥ 40 µA 1 (error) ≤ 30 µA Directive conformity Electromagnetic compatibility Directive 2014/30/EUEN 62026-2:2013 Standard conformity Degree of protectionEN 60529:2000 Fieldbus standardEN 62026-2:2013 InputEN 61131-2:2007 Emitted interferenceEN 61000-6-4:2007 AS-InterfaceEN 62026-2:2013 Noise immunityEN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 Ambient conditions Ambient temperature-25 ... 60 °C (-13 ... 140 °F) Storage temperature-25 ... 85 °C (-13 ... 185 °F) Mechanical specifications Degree of protectionIP54 according to EN 60529 ConnectionAS-Interface, AUX: Insulation piercing technologyYellow flat cable/black flat cableInputs/outputs: M8 round plug connector in accordance with EN 61076-2-104Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded)Matching connector: LM004-Gx1-A or similarOutputs: NF005-SS1-B (5-pin, bushing contacts, snap lock, B-coded).Matching connector: NM005-Sx1-B or similar Mass220 g Mounting2 clips with ∅ 8 mm drill hole Cable length1 m NoteThe flat cable routing is designed for 100 actuation cycles Classifications SystemClasscode ECLASS 11.027242604 ECLASS 10.0.127242604 ECLASS 9.027242604 ECLASS 8.027242604 ECLASS 5.127242604 ETIM 8.0EC001599 ETIM 7.0EC001599 ETIM 6.0EC001599 ETIM 5.0EC001599 UNSPSC 12.139121535