Proximity 6793 products

Filter by
Categories
Price
USD USD
Manufacturers
Rated control supply voltage DC
Rated control supply voltage AC 50 Hz
Rated control supply voltage AC 60 Hz
Number of contacts as normally closed contact
Number of contacts as normally open contact
Type of electric connection
Rated supply voltage DC
SIL according to IEC 61508
Ambient temperature
Suitable for safety functions
Rated supply voltage AC 50 Hz
Rated supply voltage AC 60 Hz
Performance level according to EN ISO 13849-1
Switching frequency
more... less
Explosion safety category for gas
Explosion safety category for dust
Type of interface
Coating housing
With status indication
Type of interface for safety communication
Construction type housing
Width sensor
more... less
Height of sensor
more... less
Length of sensor
more... less
Guard locking force
Diameter sensor
Cascadable
Switching distance
more... less
Number of semiconductor outputs with signalling function
Type of switching output
Type of switch function
Max. output current at protected output
Mechanical mounting condition for sensor
Supply voltage
Type of actuation
Interference resistance to magnetic fields
Number of contact energized outputs with signalling function
Number of protected semiconductor outputs
Number of protected contact energized outputs
With monitoring function downstream switching devices
Protected switch distance OFF
Min. output current
Protected switch distance ON
Cross-/short circuit identification possible
Filter
3SE6310-0BC01 Siemens
NFS

3SE6310-0BC01 Siemens

standard actuator for all safety switches RFID 3SE63 rectangular 91 mm x 25 mm without magnet latching
compare
USD29.40 Price
Out of Stock - Backorder
BES M04EC-PSC10B-EP02 BALLUFF - Part Number: BES03Z8
NFS

BES M04EC-PSC10B-EP02 BALLUFF - Part Number: BES03Z8

Inductive proximity sensor / switch - Balluff - model BES M04EC-PSC10B-EP02 - 1mm sensing range - Pre-wired with a 2m cable terminated with bare end flying leads - 1 x digital output (PNP transistor; 100mA) (NO (Normally Open) operation) - Cylindrical / barrel fully threaded body with M4 threads - 10-30Vdc (12Vdc / 24Vdc nom.) supply voltage - Rated for -13...+158°F / -25...+70°C ambient - IP67 - Stainless steel housing + PUR (Polyurethane) cable jacket + PBT (Polybutylene Terephthalate) sensing surface - 3500Hz / 3.5kHz max. switching frequency - Flush mounting - equivalent to BESM04ECPSC10BEP02
compare
USD122.25 Price
Out of Stock - Backorder
BES M05ED-PSC10B-EP00,2-097 BALLUFF - Part Number: BES051J
NFS

BES M05ED-PSC10B-EP00,2-097 BALLUFF - Part Number: BES051J

Inductive proximity sensor / switch - Balluff - model BES M05ED-PSC10B-EP00.2-097 - 1mm sensing range - Pre-wired with a 20cm cable terminated with bare end flying leads - 1 x digital output (PNP transistor; 100mA) (NO (Normally Open) operation) - Cylindrical / barrel fully threaded body with M5 threads - 10-30Vdc (12Vdc / 24Vdc nom.) supply voltage - Rated for -13...+158°F / -25...+70°C ambient - IP67 - Stainless steel housing + PUR (Polyurethane) cable jacket + PBT (Polybutylene Terephthalate) sensing surface - 5000Hz / 5kHz max. switching frequency - Flush mounting - equivalent to BESM05EDPSC10BEP00.2097
compare
USD126.81 Price
Out of Stock - Backorder
BES M05ED-POD08B-BP00,3-GS49-R03 BALLUFF - Part Number: BES03LE
NFS

BES M05ED-POD08B-BP00,3-GS49-R03 BALLUFF - Part Number: BES03LE

Inductive proximity sensor / switch - Balluff - model BES M05ED-POD08B-BP00.3-GS49-R03 - 0.8mm sensing range - Pre-wired with a 30cm pigtail terminated by a 3-pin M8 male connector - 1 x digital output (PNP transistor; 100mA) (NC (Normally Closed) operation) - Cylindrical / barrel fully threaded body with M5 threads - 10-30Vdc (12Vdc / 24Vdc nom.) supply voltage - Rated for -13...+158°F / -25...+70°C ambient - Rated for 100bar - IP67 - Stainless steel housing + PUR (Polyurethane) cable jacket + Ceramic sensing surface - 3000Hz / 3kHz max. switching frequency - Flush mounting - equivalent to BESM05EDPOD08BBP00.3GS49R03
compare
USD146.10 Price
Out of Stock - Backorder
BES M05ED-POC50F-S26G BALLUFF - Part Number: BES0139
NFS

BES M05ED-POC50F-S26G BALLUFF - Part Number: BES0139

Inductive proximity sensor / switch - Balluff - model BES M05ED-POC50F-S26G - 5mm sensing range - Pre-equipped with a M5 male connector - 1 x digital output (PNP transistor; 100mA) (NC (Normally Closed) operation) - Cylindrical / barrel fully threaded body with M5 threads - 10-30Vdc (12Vdc / 24Vdc nom.) supply voltage - Rated for -13...+158°F / -25...+70°C ambient - IP67 - Stainless steel housing + PET-C sensing surface - 3000Hz / 3kHz max. switching frequency - non-flush mounting - equivalent to BESM05EDPOC50FS26G
compare
USD152.07 Price
Out of Stock - Backorder
BES M05ED-POC15B-S26G BALLUFF - Part Number: BES0137
NFS

BES M05ED-POC15B-S26G BALLUFF - Part Number: BES0137

Inductive proximity sensor / switch - Balluff - model BES M05ED-POC15B-S26G - 1.5mm sensing range - Pre-equipped with a M5 male connector - 1 x digital output (PNP transistor; 100mA) (NC (Normally Closed) operation) - Cylindrical / barrel fully threaded body with M5 threads - 10-30Vdc (12Vdc / 24Vdc nom.) supply voltage - Rated for -13...+158°F / -25...+70°C ambient - IP67 - Stainless steel housing + PBT (Polybutylene Terephthalate) sensing surface - 3000Hz / 3kHz max. switching frequency - Flush mounting - equivalent to BESM05EDPOC15BS26G
compare
USD138.08 Price
Out of Stock - Backorder
BES M05ED-NSC15B-S26G BALLUFF - Part Number: BES0133
NFS

BES M05ED-NSC15B-S26G BALLUFF - Part Number: BES0133

Inductive proximity sensor / switch - Balluff - model BES M05ED-NSC15B-S26G - 1.5mm sensing range - Pre-equipped with a M5 male connector - 1 x digital output (NPN transistor; 100mA) (NO (Normally Open) operation) - Cylindrical / barrel fully threaded body with M5 threads - 10-30Vdc (12Vdc / 24Vdc nom.) supply voltage - Rated for -13...+158°F / -25...+70°C ambient - IP67 - Stainless steel housing + PBT (Polybutylene Terephthalate) sensing surface - 3000Hz / 3kHz max. switching frequency - Flush mounting - equivalent to BESM05EDNSC15BS26G
compare
USD138.08 Price
Out of Stock - Backorder
BES M05EC-PSC08B-S26G BALLUFF - Part Number: BES012Z
NFS

BES M05EC-PSC08B-S26G BALLUFF - Part Number: BES012Z

Inductive proximity sensor / switch - Balluff - model BES M05EC-PSC08B-S26G - 0.8mm sensing range - Pre-equipped with a M5 male connector - 1 x digital output (PNP transistor; 100mA) (NO (Normally Open) operation) - Cylindrical / barrel fully threaded body with M5 threads - 10-30Vdc (12Vdc / 24Vdc nom.) supply voltage - Rated for -13...+158°F / -25...+70°C ambient - IP67 - Stainless steel housing + PBT (Polybutylene Terephthalate) sensing surface - 3000Hz / 3kHz max. switching frequency - Flush mounting - equivalent to BESM05ECPSC08BS26G
compare
USD132.36 Price
Out of Stock - Backorder