VBA-2E2A-G2-ZEJ/XE2J PEPPERL+FUCHS - Part number: 192523
Disponible bajo petición

Obtenga su presupuesto personalizado ahora

Un representante de ventas dedicado le ayudará a ofrecer el mejor precio y plazos de entrega.

Debes estar registrado

VBA-2E2A-G2-ZEJ/XE2J PEPPERL+FUCHS - Part number: 192523

PEPPERL+FUCHS

comparar
VBA-2E2A-G2-ZEJ/XE2J PEPPERL+FUCHS - Part number: 192523

AS-Interface sensor/actuator module VBA-2E2A-G2-ZEJ/XE2J VBA-2E2A-G2-ZEJ/XE2J AS-Interface certificate Degree of protection IP67 A/B node with extended addressing possibility for up to 62 nodes Addressing jack Flat cable connection with cable piercing technique, variable flat cable guide Communication monitoring Inputs for 2- and 3-wire sensors Supply of the inputs and the outputs from AS-Interface Two MOVI-SWITCH-1E, controllable by SEW Ground connection (FE) possible Function display for bus, inputs and outputs Detection of overload on sensor supply Detection of output overload AS-Interface sensor/actuator module VBA-2E2A-G2-ZEJ/XE2J VBA-2E2A-G2-ZEJ/XE2J AS-Interface certificate Degree of protection IP67 A/B node with extended addressing possibility for up to 62 nodes Addressing jack Flat cable connection with cable piercing technique, variable flat cable guide Communication monitoring Inputs for 2- and 3-wire sensors Supply of the inputs and the outputs from AS-Interface Two MOVI-SWITCH-1E, controllable by SEW Ground connection (FE) possible Function display for bus, inputs and outputs Detection of overload on sensor supply Detection of output overload

MPNs 192523, PEP192523, VBA-2E2A-G2-ZEJ/XE2J
Código HS 85371091
Weight 0.1 kg
La imagen del producto es solo para fines ilustrativos.
El país de origen, el código del HS y la descripción son proporcionados por el fabricante y pueden estar sujetos a cambios sin previo aviso. Por esta razón, PLC-City no puede ser responsable de las discrepancias.
Vendido por PLC-CITY® y enviado desde Italia

Aceptamos muchos métodos de pago: Transferencia bancaria (SEPA, ACH), Tarjetas de débito/ crédito (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, enlace por Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WhateCPay.
Más información sobre nuestros métodos de pago

Este producto está cubierto por una garantía 12 Meses válida para defectos de fabricación o mal funcionamiento. La garantía no cubre los daños causados por un uso inadecuado o daños accidentales.
Más información sobre nuestra garantía

Las devoluciones están sujetas a autorización previa y se reembolsarán con un crédito en tienda. Se excluyen los artículos en backorder.

Ver nuestra política de devoluciones

Disponible bajo petición

Obtenga su presupuesto personalizado ahora

Un representante de ventas dedicado le ayudará a ofrecer el mejor precio y plazos de entrega.

Debes estar registrado

Información del producto

Descripción

Extracto de la hoja de datos: Información técnica del  VBA-2E2A-G2-ZEJ/XE2J Descripción del producto G2 flat module2 inputs (PNP) and 2 electronic outputs General specifications Node typeA/B node AS-Interface specificationV3.0 Required gateway specification≥ V2.1 UL File NumberE223772 Indicators/operating means LED FAULTerror display; LED redred: communication error or address is 0red flashing: overload of sensor power supply or outputs LED PWRAS-Interface voltage; LED green LED INswitching state (input); 2 LED yellow LED OUTSwitching state (output); 2 LED yellow Electrical specifications Rated operating voltage26.5 ... 31.6 V from AS-Interface Rated operating current≤ 40 mA (without sensors) / max. 170 mA Protection classIII Surge protectionUe: Over voltage category III, safe isolated power supplies (PELV) Input Number/Type2 inputs for 2- or 3-wire sensors (PNP), DC Supplyfrom AS-Interface Voltage21 ... 31 V Current loading capacity≤ 130 mA (TB ≤ 40 °C),≤ 100 mA (TB ≤ 60 °C), overload and short-circuit protected Input current≤ 8 mA (limited internally) Switching pointaccording to DIN EN 61131-2 (Type 2) 0 (unattenuated)≤ 2 mA 1 (attenuated)≥ 4 mA Output Number/Type2 electronic outputs, PNP overload and short-circuit proof Supplyfrom AS-Interface Currentlimited by the current loading capacity of the module Directive conformity Electromagnetic compatibility Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001 Standard conformity Degree of protectionEN 60529:2000 InputEN 61131-2:2007 Emitted interferenceEN 61000-6-4:2001 AS-InterfaceEN 62026-2:2013 Noise immunityEN 61000-6-2:2001 Programming instructions ProfileS-B.A.E IO codeB ID codeA ID1 code7 ID2 codeE Data bits (function via AS-Interface)InputOutput D0 - OUT1 D1 - OUT2 D2 IN3 - D3 IN4 - Parameter bits (programmable via AS-i)function P0not used P1not used P2not used P3not used Ambient conditions Ambient temperature-25 ... 60 °C (-13 ... 140 °F) Storage temperature-25 ... 85 °C (-13 ... 185 °F) Relative humidity85 % , noncondensing Climatic conditionsFor indoor use only Altitude≤ 2000 m above MSL Pollution degree3 Mechanical specifications Degree of protectionIP67 Connectioncable piercing method: flat cable yellowinputs/outputs: M12 round connector Material HousingPBT Mass100 g Tightening torque, cable gland0.4 Nm MountingMounting plate Classifications SystemClasscode ECLASS 11.027242604 ECLASS 10.0.127242604 ECLASS 9.027242604 ECLASS 8.027242604 ECLASS 5.127242604 ETIM 8.0EC001599 ETIM 7.0EC001599 ETIM 6.0EC001599 ETIM 5.0EC001599 UNSPSC 12.139121535 Extracto de la hoja de datos: Información técnica del  VBA-2E2A-G2-ZEJ/XE2J Descripción del producto G2 flat module2 inputs (PNP) and 2 electronic outputs General specifications Node typeA/B node AS-Interface specificationV3.0 Required gateway specification≥ V2.1 UL File NumberE223772 Indicators/operating means LED FAULTerror display; LED redred: communication error or address is 0red flashing: overload of sensor power supply or outputs LED PWRAS-Interface voltage; LED green LED INswitching state (input); 2 LED yellow LED OUTSwitching state (output); 2 LED yellow Electrical specifications Rated operating voltage26.5 ... 31.6 V from AS-Interface Rated operating current≤ 40 mA (without sensors) / max. 170 mA Protection classIII Surge protectionUe: Over voltage category III, safe isolated power supplies (PELV) Input Number/Type2 inputs for 2- or 3-wire sensors (PNP), DC Supplyfrom AS-Interface Voltage21 ... 31 V Current loading capacity≤ 130 mA (TB ≤ 40 °C),≤ 100 mA (TB ≤ 60 °C), overload and short-circuit protected Input current≤ 8 mA (limited internally) Switching pointaccording to DIN EN 61131-2 (Type 2) 0 (unattenuated)≤ 2 mA 1 (attenuated)≥ 4 mA Output Number/Type2 electronic outputs, PNP overload and short-circuit proof Supplyfrom AS-Interface Currentlimited by the current loading capacity of the module Directive conformity Electromagnetic compatibility Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001 Standard conformity Degree of protectionEN 60529:2000 InputEN 61131-2:2007 Emitted interferenceEN 61000-6-4:2001 AS-InterfaceEN 62026-2:2013 Noise immunityEN 61000-6-2:2001 Programming instructions ProfileS-B.A.E IO codeB ID codeA ID1 code7 ID2 codeE Data bits (function via AS-Interface)InputOutput D0 - OUT1 D1 - OUT2 D2 IN3 - D3 IN4 - Parameter bits (programmable via AS-i)function P0not used P1not used P2not used P3not used Ambient conditions Ambient temperature-25 ... 60 °C (-13 ... 140 °F) Storage temperature-25 ... 85 °C (-13 ... 185 °F) Relative humidity85 % , noncondensing Climatic conditionsFor indoor use only Altitude≤ 2000 m above MSL Pollution degree3 Mechanical specifications Degree of protectionIP67 Connectioncable piercing method: flat cable yellowinputs/outputs: M12 round connector Material HousingPBT Mass100 g Tightening torque, cable gland0.4 Nm MountingMounting plate Classifications SystemClasscode ECLASS 11.027242604 ECLASS 10.0.127242604 ECLASS 9.027242604 ECLASS 8.027242604 ECLASS 5.127242604 ETIM 8.0EC001599 ETIM 7.0EC001599 ETIM 6.0EC001599 ETIM 5.0EC001599 UNSPSC 12.139121535

Los más vendidos junto con

Las opiniones de nuestros clientes

Trustpilot