IPH-FP-C1D1 PEPPERL+FUCHS - Part number: 915494

<p>Extracto de la hoja de datos: Información técnica del  IPH-FP-C1D1 Descripción del producto LF read/write head, for IDENTControl, for hazardous areas General specifications Operating frequency125 kHz Transfer rate2 kBit/s Sensing range Read distance0 ... 52 mm Write distance0 ... 43 mm Widthmax. 62 mm UL File NumberE305142 Functional safety related parameters MTTFd710 a Mission Time (TM)10 a Diagnostic Coverage (DC)0 % Indicators/operating means LED green/yellowgreen: power ongreen flashing: read/write attempt performedyellow: data carrier detected Electrical specifications Power consumption≤ 1.2 W Supplyfrom the IDENTControl Standard conformity Electromagnetic compatibilityEN 301489-1 EN 301489-3 EN 300330 Degree of protectionEN 60529 SafetyEN 62368-1 RFIDISO/IEC 18000-2 Approvals and certificates UL approvalClass I, Division 1, Groups C, D FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Ambient conditions Ambient temperature-25 ... 70 °C (-13 ... 158 °F) Storage temperature-40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Housing length157 mm Housing width157 mm Housing height140 mm Degree of protectionNEMA Type 4, 7, 9 ConnectionTerminals Material Housingdiecast aluminum Basediecast aluminum Installation Distance between two headsMultiplex on: ≥ 65 mm Multiplex off: ≥ 515 mm Massapprox. 4080 g Classifications SystemClasscode ECLASS 11.027280401 ECLASS 10.0.127280401 ECLASS 9.027280401 ECLASS 8.027280401 ECLASS 5.127280401 ETIM 8.0EC002998 ETIM 7.0EC002998 ETIM 6.0EC002998 ETIM 5.0EC002998 UNSPSC 12.143211710</p> <p>Extracto de la hoja de datos: Información técnica del  IPH-FP-C1D1 Descripción del producto LF read/write head, for IDENTControl, for hazardous areas General specifications Operating frequency125 kHz Transfer rate2 kBit/s Sensing range Read distance0 ... 52 mm Write distance0 ... 43 mm Widthmax. 62 mm UL File NumberE305142 Functional safety related parameters MTTFd710 a Mission Time (TM)10 a Diagnostic Coverage (DC)0 % Indicators/operating means LED green/yellowgreen: power ongreen flashing: read/write attempt performedyellow: data carrier detected Electrical specifications Power consumption≤ 1.2 W Supplyfrom the IDENTControl Standard conformity Electromagnetic compatibilityEN 301489-1 EN 301489-3 EN 300330 Degree of protectionEN 60529 SafetyEN 62368-1 RFIDISO/IEC 18000-2 Approvals and certificates UL approvalClass I, Division 1, Groups C, D FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Ambient conditions Ambient temperature-25 ... 70 °C (-13 ... 158 °F) Storage temperature-40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Housing length157 mm Housing width157 mm Housing height140 mm Degree of protectionNEMA Type 4, 7, 9 ConnectionTerminals Material Housingdiecast aluminum Basediecast aluminum Installation Distance between two headsMultiplex on: ≥ 65 mm Multiplex off: ≥ 515 mm Massapprox. 4080 g Classifications SystemClasscode ECLASS 11.027280401 ECLASS 10.0.127280401 ECLASS 9.027280401 ECLASS 8.027280401 ECLASS 5.127280401 ETIM 8.0EC002998 ETIM 7.0EC002998 ETIM 6.0EC002998 ETIM 5.0EC002998 UNSPSC 12.143211710</p>