VAN-115/230AC-K16 PEPPERL+FUCHS - Part number: 129377
Rupture de stock - Backorder
A commander auprès du fabricant
717,39 USD

Taxes d’importation exclues

Vous devez être connecté à votre compte client

VAN-115/230AC-K16 PEPPERL+FUCHS - Part number: 129377

PEPPERL+FUCHS

AS-Interface power supply VAN-115/230AC-K16 VAN-115/230AC-K16 AS-Interface certificate PELV/SELV LED operating display 8 A output load 115 V AC / 230 V AC switchable AS-Interface data decoupling Overload protection using FUSE mode AS-Interface power supply VAN-115/230AC-K16 VAN-115/230AC-K16 AS-Interface certificate PELV/SELV LED operating display 8 A output load 115 V AC / 230 V AC switchable AS-Interface data decoupling Overload protection using FUSE mode

MPNs 129377, PEP129377, VAN-115/230AC-K16
Code SH 85044000
Weight 0.89 kg

L’image du produit est à des fins d’illustration seulement.
Le pays d’origine, le code SH et la description sont fournis par le fabricant et peuvent être modifiés sans préavis. Pour cette raison, PLC-City ne peut être tenu responsable des écarts éventuels.
Vendu par PLC-CITY® et expédié d’Italie

Nous acceptons de nombreuses méthodes de paiement : Virement bancaire (SEPA, ACH), Cartes de débit/crédit (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, lien par Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WhateCay.
Plus d’informations sur nos méthodes de paiement

Ce produit est couvert par une garantie 12 Mois, valable pour les défauts de fabrication ou les dysfonctionnements. La garantie ne couvre pas les dommages causés par une mauvaise utilisation ou des dommages accidentels.
En savoir plus sur notre garantie

Les retours doivent être préalablement autorisés et donnent lieu à un avoir. Les articles en commande différée sont exclus.

Voir notre politique de retour

717,39 USD

Taxes d’importation exclues

Vous devez être connecté à votre compte client
Vendu par PLC-CITY® et expédié d’Italie
Nous sommes un partenaire spécialisé de PEPPERL+FUCHS
Livraison express gratuite vers États-Unis
Loader...
Voir tous les services d’expédition
Demander un devis pour connaître la date de livraison

Nous acceptons de nombreuses méthodes de paiement : Virement bancaire (SEPA, ACH), Cartes de débit/crédit (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, lien par Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WhateCay.
Plus d’informations sur nos méthodes de paiement

Ce produit est couvert par une garantie 12 Mois, valable pour les défauts de fabrication ou les dysfonctionnements. La garantie ne couvre pas les dommages causés par une mauvaise utilisation ou des dommages accidentels.
En savoir plus sur notre garantie

Les retours doivent être préalablement autorisés et donnent lieu à un avoir. Les articles en commande différée sont exclus.

Voir notre politique de retour

Obtenez votre devis personnalisé maintenant

Un représentant des ventes dédié vous aidera à offrir le meilleur prix et les meilleurs délais de livraison.

Vous devez être connecté à votre compte client

Demandez votre service technique sur mesure

Comptez sur notre équipe technique d’experts pour une gamme de services personnalisés: réparation, programmation, maintenance et bien plus encore.

Informations sur les produits

La description

Datasheet excerpt: Technical data of  VAN-115/230AC-K16 Product Description AS-Interface power supply, data decoupling, 8 A General specifications UL File NumberE223176 MTBF100 a Indicators/operating means Reset push-button switchFUSE mode reset Power selection switchchangeover switch for 115 V AC/230 V AC LED Overloadred LED, flashes in the FUSE mode LED IR onred LED:ON: Plug-in jumper position 2-3OFF: Plug-in jumper position 1-2 Plug-in jumperPosition 1-2: Communication ModePosition 2-3: IR addressing LED AS-i okoperating display; LED green Electrical specifications FusingT8A/250 V AC HBC (not accessible) Capacity factor> 0.5 Rated operating voltagenominal: 100 ... 120 V AC/220 ... 240 V AC (front end selectable)permissible: 85 ... 132 V AC/184 ... 264 V AC/230 ... 375 V DC Rated operating current6,0 A (Switch position 115 V)2.8 A (Switch position 230 V) Supply frequency47 ... 63 Hz or DC Efficiencytyp. 92 % (at 230 V AC/8 A) Surge protectionlimited to max. 55 V Output Short-circuit protection/overloadFUSE Mode (2 ... 5 s current, then trips) Current limit> 8.4 A Voltage30.55 V DC ± 3 % Current8 A Galvanic isolationovervoltage category III Residual ripple≤ 50 mVss (500 kHz bandwidth, 50-Ω-measurement with ohmic load) Short-circuit current12 ... 25 A (max. 5 s) Standard conformity Electromagnetic compatibilityemitted interference in accordance with EN 50081-2 class B (EN 55011, EN 55022)noise immunity in accordance with EN 61000-6-2, EN 61000-4-2 to EN 61000-4-6, EN 61000-4-11 Ambient conditions Ambient temperature-10 ... 70 °C (14 ... 158 °F) (Measured 25 mm below the device)from 60° C 6W/°C power recovery necessary Storage temperature-25 ... 85 °C (-13 ... 185 °F) Pollution degree2 Mechanical specifications Degree of protectionIP20 according to EN 60529 Protection class1 (IEC 60536); Protective conductor connection necessary ConnectionConnection terminals, max. conductor cross-section flexible: 0.5 ... 4 mm2fixed: 0.5 ... 6 mm2stripped length 7 mm, connector sleeves are permissible Material Housingmetal Mass890 g Classifications SystemClasscode ECLASS 11.027040301 ECLASS 10.0.127040301 ECLASS 9.027040301 ECLASS 8.027040301 ECLASS 5.127040301 ETIM 8.0EC002540 ETIM 7.0EC002540 ETIM 6.0EC002540 ETIM 5.0EC002540 UNSPSC 12.139121004 Datasheet excerpt: Technical data of  VAN-115/230AC-K16 Product Description AS-Interface power supply, data decoupling, 8 A General specifications UL File NumberE223176 MTBF100 a Indicators/operating means Reset push-button switchFUSE mode reset Power selection switchchangeover switch for 115 V AC/230 V AC LED Overloadred LED, flashes in the FUSE mode LED IR onred LED:ON: Plug-in jumper position 2-3OFF: Plug-in jumper position 1-2 Plug-in jumperPosition 1-2: Communication ModePosition 2-3: IR addressing LED AS-i okoperating display; LED green Electrical specifications FusingT8A/250 V AC HBC (not accessible) Capacity factor> 0.5 Rated operating voltagenominal: 100 ... 120 V AC/220 ... 240 V AC (front end selectable)permissible: 85 ... 132 V AC/184 ... 264 V AC/230 ... 375 V DC Rated operating current6,0 A (Switch position 115 V)2.8 A (Switch position 230 V) Supply frequency47 ... 63 Hz or DC Efficiencytyp. 92 % (at 230 V AC/8 A) Surge protectionlimited to max. 55 V Output Short-circuit protection/overloadFUSE Mode (2 ... 5 s current, then trips) Current limit> 8.4 A Voltage30.55 V DC ± 3 % Current8 A Galvanic isolationovervoltage category III Residual ripple≤ 50 mVss (500 kHz bandwidth, 50-Ω-measurement with ohmic load) Short-circuit current12 ... 25 A (max. 5 s) Standard conformity Electromagnetic compatibilityemitted interference in accordance with EN 50081-2 class B (EN 55011, EN 55022)noise immunity in accordance with EN 61000-6-2, EN 61000-4-2 to EN 61000-4-6, EN 61000-4-11 Ambient conditions Ambient temperature-10 ... 70 °C (14 ... 158 °F) (Measured 25 mm below the device)from 60° C 6W/°C power recovery necessary Storage temperature-25 ... 85 °C (-13 ... 185 °F) Pollution degree2 Mechanical specifications Degree of protectionIP20 according to EN 60529 Protection class1 (IEC 60536); Protective conductor connection necessary ConnectionConnection terminals, max. conductor cross-section flexible: 0.5 ... 4 mm2fixed: 0.5 ... 6 mm2stripped length 7 mm, connector sleeves are permissible Material Housingmetal Mass890 g Classifications SystemClasscode ECLASS 11.027040301 ECLASS 10.0.127040301 ECLASS 9.027040301 ECLASS 8.027040301 ECLASS 5.127040301 ETIM 8.0EC002540 ETIM 7.0EC002540 ETIM 6.0EC002540 ETIM 5.0EC002540 UNSPSC 12.139121004

Avis sur notre entreprise