UC500-D1-3K-V7 PEPPERL+FUCHS - Part number: 212371
Rupture de stock - Backorder
A commander auprès du fabricant
771,02 USD

Taxes d’importation exclues

Vous devez être connecté à votre compte client

UC500-D1-3K-V7 PEPPERL+FUCHS - Part number: 212371

PEPPERL+FUCHS

Ultrasonic sensor UC500-D1-3K-V7 UC500-D1-3K-V7 Specially for level monitoring in vessels Large operating voltage range10 V DC ... 253 V DC20 V AC ... 253 V AC 3 relay outputs Parameter assignment via DIP-switches Temperature compensation Cable socket included with delivery Ultrasonic sensor UC500-D1-3K-V7 UC500-D1-3K-V7 Specially for level monitoring in vessels Large operating voltage range10 V DC ... 253 V DC20 V AC ... 253 V AC 3 relay outputs Parameter assignment via DIP-switches Temperature compensation Cable socket included with delivery

MPNs 212371, PEP212371, UC500-D1-3K-V7
Code SH 90318000
Weight 0.7 kg

L’image du produit est à des fins d’illustration seulement.
Le pays d’origine, le code SH et la description sont fournis par le fabricant et peuvent être modifiés sans préavis. Pour cette raison, PLC-City ne peut être tenu responsable des écarts éventuels.
Vendu par PLC-CITY® et expédié d’Italie

Nous acceptons de nombreuses méthodes de paiement : Virement bancaire (SEPA, ACH), Cartes de débit/crédit (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, lien par Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WhateCay.
Plus d’informations sur nos méthodes de paiement

Ce produit est couvert par une garantie 12 Mois, valable pour les défauts de fabrication ou les dysfonctionnements. La garantie ne couvre pas les dommages causés par une mauvaise utilisation ou des dommages accidentels.
En savoir plus sur notre garantie

Les retours doivent être préalablement autorisés et donnent lieu à un avoir. Les articles en commande différée sont exclus.

Voir notre politique de retour

771,02 USD

Taxes d’importation exclues

Vous devez être connecté à votre compte client
Vendu par PLC-CITY® et expédié d’Italie
Nous sommes un partenaire spécialisé de PEPPERL+FUCHS
Livraison express gratuite vers États-Unis
Loader...
Voir tous les services d’expédition
Demander un devis pour connaître la date de livraison

Nous acceptons de nombreuses méthodes de paiement : Virement bancaire (SEPA, ACH), Cartes de débit/crédit (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, lien par Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WhateCay.
Plus d’informations sur nos méthodes de paiement

Ce produit est couvert par une garantie 12 Mois, valable pour les défauts de fabrication ou les dysfonctionnements. La garantie ne couvre pas les dommages causés par une mauvaise utilisation ou des dommages accidentels.
En savoir plus sur notre garantie

Les retours doivent être préalablement autorisés et donnent lieu à un avoir. Les articles en commande différée sont exclus.

Voir notre politique de retour

Obtenez votre devis personnalisé maintenant

Un représentant des ventes dédié vous aidera à offrir le meilleur prix et les meilleurs délais de livraison.

Vous devez être connecté à votre compte client

Demandez votre service technique sur mesure

Comptez sur notre équipe technique d’experts pour une gamme de services personnalisés: réparation, programmation, maintenance et bien plus encore.

Informations sur les produits

La description

Datasheet excerpt: Technical data of  UC500-D1-3K-V7 Product Description Single head system General specifications Sensing range60 ... 550 mm Dead band0 ... 60 mm Standard target plate100 mm x 100 mm Transducer frequency380 kHz Response delay> 10 s, relay< 1 s, LEDs Indicators/operating means LED redLED 1: overfill indicationLED 4: underfill indication LED green/yellowLED 2: overfill warning and normal operation LED 3: normal operation and underfill warning DIP switchsetting of the switch points/operating modes Electrical specifications Operating voltage10 ... 253 V DC 20 ... 253 V AC , 47 ... 63 Hz No-load supply current< 30 mA with UB = 30 V DC< 110 mA at UB = 10 V DC< 25 mA at UB = 220 V AC Output Output type3 relay outputs, normally open/closed, selectable Range hysteresis20 mm Contact loading253 V AC/150V DC, 3 A (ohm. load) Life spanelectrical: 105 switching cycles with ohmic load(3 A/253 V AC or 3 A/30 V DC)minimum contact load: 100 µA/100 mV DCmechanical: 20 x 106 switching cycles Temperature influence< 4 % Fusing≤ 3 A Slow-blow fuse per output in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. Compliance with standards and directives Standard conformity StandardsEN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 Approvals and certificates EAC conformityTR CU 004/2011 TR CU 020/2011 TR CU 037/2016 CCC approvalself-declaration Ambient conditions Ambient temperature-20 ... 60 °C (-4 ... 140 °F) Storage temperature-40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Degree of protectionIP65 ConnectionFemale connector, V7 (7-pin), 90° Wire cross section: ≤1.5 mm2 cable diameter ∅7 ... 9 mm Material Housingcover: PC housing: PBTthreaded flange: stainless steel installation connector/cable socket: PETP Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam Mass700 g NoteIn case of loss or damage, the cable socket must be replaced by an identical cable socket (type V7-W) from Pepperl+Fuchs! Classifications SystemClasscode ECLASS 11.027272803 ECLASS 10.0.127272803 ECLASS 9.027272803 ECLASS 8.027272803 ECLASS 5.127272803 ETIM 8.0EC001849 ETIM 7.0EC001849 ETIM 6.0EC001849 ETIM 5.0EC001849 UNSPSC 12.141111960 Datasheet excerpt: Technical data of  UC500-D1-3K-V7 Product Description Single head system General specifications Sensing range60 ... 550 mm Dead band0 ... 60 mm Standard target plate100 mm x 100 mm Transducer frequency380 kHz Response delay> 10 s, relay< 1 s, LEDs Indicators/operating means LED redLED 1: overfill indicationLED 4: underfill indication LED green/yellowLED 2: overfill warning and normal operation LED 3: normal operation and underfill warning DIP switchsetting of the switch points/operating modes Electrical specifications Operating voltage10 ... 253 V DC 20 ... 253 V AC , 47 ... 63 Hz No-load supply current< 30 mA with UB = 30 V DC< 110 mA at UB = 10 V DC< 25 mA at UB = 220 V AC Output Output type3 relay outputs, normally open/closed, selectable Range hysteresis20 mm Contact loading253 V AC/150V DC, 3 A (ohm. load) Life spanelectrical: 105 switching cycles with ohmic load(3 A/253 V AC or 3 A/30 V DC)minimum contact load: 100 µA/100 mV DCmechanical: 20 x 106 switching cycles Temperature influence< 4 % Fusing≤ 3 A Slow-blow fuse per output in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. Compliance with standards and directives Standard conformity StandardsEN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 Approvals and certificates EAC conformityTR CU 004/2011 TR CU 020/2011 TR CU 037/2016 CCC approvalself-declaration Ambient conditions Ambient temperature-20 ... 60 °C (-4 ... 140 °F) Storage temperature-40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Degree of protectionIP65 ConnectionFemale connector, V7 (7-pin), 90° Wire cross section: ≤1.5 mm2 cable diameter ∅7 ... 9 mm Material Housingcover: PC housing: PBTthreaded flange: stainless steel installation connector/cable socket: PETP Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam Mass700 g NoteIn case of loss or damage, the cable socket must be replaced by an identical cable socket (type V7-W) from Pepperl+Fuchs! Classifications SystemClasscode ECLASS 11.027272803 ECLASS 10.0.127272803 ECLASS 9.027272803 ECLASS 8.027272803 ECLASS 5.127272803 ETIM 8.0EC001849 ETIM 7.0EC001849 ETIM 6.0EC001849 ETIM 5.0EC001849 UNSPSC 12.141111960

Avis sur notre entreprise