LFL2-BK-U-PUR10-EMS PEPPERL+FUCHS - Part number: 288564
Rupture de stock - Backorder
A commander auprès du fabricant
91,25 USD

Taxes d’importation exclues

Vous devez être connecté à votre compte client

LFL2-BK-U-PUR10-EMS PEPPERL+FUCHS - Part number: 288564

PEPPERL+FUCHS

Float Switch LFL2-BK-U-PUR10-EMS LFL2-BK-U-PUR10-EMS Switch element: microswitch, mercury-free Limit value detection for fluids Ball design: high buoyancy Float Switch LFL2-BK-U-PUR10-EMS LFL2-BK-U-PUR10-EMS Switch element: microswitch, mercury-free Limit value detection for fluids Ball design: high buoyancy

MPNs 288564, PEP288564, LFL2-BK-U-PUR10-EMS
Code SH 90321000
Weight N/A

L’image du produit est à des fins d’illustration seulement.
Le pays d’origine, le code SH et la description sont fournis par le fabricant et peuvent être modifiés sans préavis. Pour cette raison, PLC-City ne peut être tenu responsable des écarts éventuels.
Vendu par PLC-CITY® et expédié d’Italie

Nous acceptons de nombreuses méthodes de paiement : Virement bancaire (SEPA, ACH), Cartes de débit/crédit (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, lien par Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WhateCay.
Plus d’informations sur nos méthodes de paiement

Ce produit est couvert par une garantie 12 Mois, valable pour les défauts de fabrication ou les dysfonctionnements. La garantie ne couvre pas les dommages causés par une mauvaise utilisation ou des dommages accidentels.
En savoir plus sur notre garantie

Les retours doivent être préalablement autorisés et donnent lieu à un avoir. Les articles en commande différée sont exclus.

Voir notre politique de retour

91,25 USD

Taxes d’importation exclues

Vous devez être connecté à votre compte client
Vendu par PLC-CITY® et expédié d’Italie
Nous sommes un partenaire spécialisé de PEPPERL+FUCHS
To États-Unis starting from 27,36 USD par DHL Express Worldwide
Loader...
Voir tous les services d’expédition
Demander un devis pour connaître la date de livraison

Nous acceptons de nombreuses méthodes de paiement : Virement bancaire (SEPA, ACH), Cartes de débit/crédit (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, lien par Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay Deal, Przelewy24, WhateCay.
Plus d’informations sur nos méthodes de paiement

Ce produit est couvert par une garantie 12 Mois, valable pour les défauts de fabrication ou les dysfonctionnements. La garantie ne couvre pas les dommages causés par une mauvaise utilisation ou des dommages accidentels.
En savoir plus sur notre garantie

Les retours doivent être préalablement autorisés et donnent lieu à un avoir. Les articles en commande différée sont exclus.

Voir notre politique de retour

Obtenez votre devis personnalisé maintenant

Un représentant des ventes dédié vous aidera à offrir le meilleur prix et les meilleurs délais de livraison.

Vous devez être connecté à votre compte client

Informations sur les produits

La description

Datasheet excerpt: Technical data of  LFL2-BK-U-PUR10-EMS Electrical specifications Contact loading250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load Rated insulation voltage300 V Pulse withstand voltage4 kV Electrical life≥ 5 x 104 switching cycles Directive conformity Low voltage Directive 2014/35/EUEN 60947-5-1:2004 + Cor.:2005 + A1:2009 Conformity Degree of protectionIEC 60529:2001 Application Descriptionmicroswitch with switching ball, change-over contact Function and system design Equipment architectureThis device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements. Operating conditions Installation conditions Installation instructionsrange of application and minimum length between mounting and float:≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluidsmounting:The float switch is mounted by means of a counter weight or rods (e. g. float switch combination) from the top.The pivot of the cable should always be horizontal. Process conditions Process pressure (static pressure)≤ 2 bar (29 psi) at 20 °C (68 °F) Density≥ 0.6 g/cm3 Ambient conditions Ambient temperature5 ... 70 °C (41 ... 158 °F) Storage temperature-25 ... 70 °C (-13 ... 158 °F) Altitude≤ 2000 m above MSL Mechanical specifications Degree of protectionIP68 Cable Length10 m Mechanical construction Materialfloat: PP (Polypropylene)cable: PUR, highly flexible (3 x 0.50 mm2) Switching pointswitch angle, measured against the horizontal:- upper switch point +25° ±10°- lower switch point -14° ±10° General information Supplementary informationStatement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Classifications SystemClasscode ECLASS 11.027200510 ECLASS 10.0.127200510 ECLASS 9.027200510 ECLASS 8.027200510 ECLASS 5.127200510 ETIM 8.0EC011178 ETIM 7.0EC011178 ETIM 6.0EC001447 ETIM 5.0EC001447 UNSPSC 12.141111950 Datasheet excerpt: Technical data of  LFL2-BK-U-PUR10-EMS Electrical specifications Contact loading250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load Rated insulation voltage300 V Pulse withstand voltage4 kV Electrical life≥ 5 x 104 switching cycles Directive conformity Low voltage Directive 2014/35/EUEN 60947-5-1:2004 + Cor.:2005 + A1:2009 Conformity Degree of protectionIEC 60529:2001 Application Descriptionmicroswitch with switching ball, change-over contact Function and system design Equipment architectureThis device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements. Operating conditions Installation conditions Installation instructionsrange of application and minimum length between mounting and float:≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluidsmounting:The float switch is mounted by means of a counter weight or rods (e. g. float switch combination) from the top.The pivot of the cable should always be horizontal. Process conditions Process pressure (static pressure)≤ 2 bar (29 psi) at 20 °C (68 °F) Density≥ 0.6 g/cm3 Ambient conditions Ambient temperature5 ... 70 °C (41 ... 158 °F) Storage temperature-25 ... 70 °C (-13 ... 158 °F) Altitude≤ 2000 m above MSL Mechanical specifications Degree of protectionIP68 Cable Length10 m Mechanical construction Materialfloat: PP (Polypropylene)cable: PUR, highly flexible (3 x 0.50 mm2) Switching pointswitch angle, measured against the horizontal:- upper switch point +25° ±10°- lower switch point -14° ±10° General information Supplementary informationStatement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Classifications SystemClasscode ECLASS 11.027200510 ECLASS 10.0.127200510 ECLASS 9.027200510 ECLASS 8.027200510 ECLASS 5.127200510 ETIM 8.0EC011178 ETIM 7.0EC011178 ETIM 6.0EC001447 ETIM 5.0EC001447 UNSPSC 12.141111950

Avis sur notre entreprise