2CSK202481R1922 ABB TH/U 1.1.CH
предоставляется по запросу

Получите свою персонализированную цитату сейчас

Специальный представитель поможет вам предложить лучшие цены и сроки доставки.

Вы должны авторизоваться

2CSK202481R1922 ABB TH/U 1.1.CH

2CSK202481R1922 TH/U 1.1.CH - Transponder holder Chiara, MIFARE 2CSK202481R1922 TH/U 1.1.CH - Transponder holder Chiara, MIFARE

MPNs 2CSKK6200C, ABB2CSKK6200C, 2CSK202481R1922
EAN 8012542024811
кода ГС 85365080
страны происхождения Италия
Weight 0.06 kg
Объёмный вес 0.14 kg

Изображение продукта предназначено только для иллюстрации.
Страна происхождения, код ГС и описание предоставлены производителем и могут быть изменены без предварительного уведомления. По этой причине PLC-City не может нести ответственность за любые расхождения.
Продано PLC-CITY® и отправлено из Италии

Мы принимаем много способов оплаты: Банковский перевод (SEPA, ACH), Дебетовые/ Кредитные карты (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, Link by Stripe, Cartes Bancaires, Alipay, Banbancontact, blik, eps, giropay, Przelewy24, WhateCeCPay.
Подробнее о наших методах оплаты

Этот продукт покрыт гарантией 12 месяцы, действительный для производственных дефектов или неисправностей. Гарантия не покрывает ущерб, вызванный неправильным использованием или случайным повреждением.
Узнайте больше о нашей гарантии

Возврат осуществляется только с предварительного одобрения и компенсируется магазинным кредитом. Товары по предзаказу не подлежат возврату.

Просмотреть нашу политику возврата

предоставляется по запросу

Получите свою персонализированную цитату сейчас

Специальный представитель поможет вам предложить лучшие цены и сроки доставки.

Вы должны авторизоваться

информацию о продукте

Описание

The "transponder holder" is a flush-mounting device designed to realize access control systems with a communication support based on KNX bus. It is equipped with one relay (4A @24V AC/DC) and one binary input to be used for connecting external conventional push-button for switch, dimmer and shutter functionalities, or for example for connecting window contact or similar. The output can be programmed as "Linked to access control", receiving in this case switching commands from the device itself (according to card insertion/removal); or being a standard KNX Switch actuator output, able to be controlled by every KNX-standard devices. The white blinking LED placed on the front of the device allow you to monitor device operation and can be also switched ON/OFF in the proper color according to KNX. The transponder reader requires a 12...24 V AC/DC external power supply to ensure its operation even with bus voltage failure. The "transponder holder" is a flush-mounting device designed to realize access control systems with a communication support based on KNX bus. It is equipped with one relay (4A @24V AC/DC) and one binary input to be used for connecting external conventional push-button for switch, dimmer and shutter functionalities, or for example for connecting window contact or similar. The output can be programmed as "Linked to access control", receiving in this case switching commands from the device itself (according to card insertion/removal); or being a standard KNX Switch actuator output, able to be controlled by every KNX-standard devices. The white blinking LED placed on the front of the device allow you to monitor device operation and can be also switched ON/OFF in the proper color according to KNX. The transponder reader requires a 12...24 V AC/DC external power supply to ensure its operation even with bus voltage failure.

технические характеристики

Degree of protection (IP)
IP20
Mounting method
Flush-mounted
Colour
White
Surface protection
Untreated
Material
Plastic
Model
Chip card
Material quality
Thermoplastic
Surface finishing
Glossy
RAL-number (similar)
9003
With bus connection
TRUE
Bus system KNX
TRUE

Отзывы о нашей компании