SWC MTS 250A 3P Riello UPS - код заказа: WMTS250013P0

<div class="row"> <div class="col-xs-12"> <h3>Three-phase Static Transfer Switch 250 A</h3> <p>Three-phase Static Transfer Switch with 250 A rated current and 3-pole configuration, designed to provide continuity for critical loads in data center, industrial, medical and transport environments. The device supplies the load from the priority source and uses the secondary source as an alternative in the event of a fault or out-of-tolerance condition. The range supports redundant architectures, load-sharing systems, backup configurations and Dynamic Dual Bus solutions with source synchronization through a dedicated option. Static transfer helps maintain power to the most sensitive loads under high-reliability conditions.</p> <h4>Technical features</h4> <ul> <li>Rated current: 250 A.</li> <li>Configuration: 3 poles.</li> <li>Priority source and secondary source with redundant, load-sharing or backup modes.</li> <li>Possible synchronization between systems through UGS option according to range documentation.</li> <li>Architecture designed for critical three-phase loads.</li> </ul> <h4>Integration process</h4> <p>The integration process requires source analysis, priority source definition, load wiring, synchronization checks and transfer tests. Commissioning must be carried out by qualified personnel.</p> <h4>Configuration software</h4> <p>Management depends on the system configuration, communication accessories and technical procedures required for static transfer. During commissioning, technicians should also record wiring, protection coordination, alarm mapping and final operating settings so that future maintenance can reproduce the same safe operating conditions. This approach improves traceability in professional installations and supports correct interaction between the accessory, the UPS and the protected load.</p> <h4>Riello compatibility</h4> <p>The Riello compatibility or reference series is: Master Switch Three-phase MTS.</p> </div> </div> <div class="row"> <div class="col-xs-12"> <h3>Three-phase Static Transfer Switch 250 A</h3> <p>Three-phase Static Transfer Switch with 250 A rated current and 3-pole configuration, designed to provide continuity for critical loads in data center, industrial, medical and transport environments. The device supplies the load from the priority source and uses the secondary source as an alternative in the event of a fault or out-of-tolerance condition. The range supports redundant architectures, load-sharing systems, backup configurations and Dynamic Dual Bus solutions with source synchronization through a dedicated option. Static transfer helps maintain power to the most sensitive loads under high-reliability conditions.</p> <h4>Technical features</h4> <ul> <li>Rated current: 250 A.</li> <li>Configuration: 3 poles.</li> <li>Priority source and secondary source with redundant, load-sharing or backup modes.</li> <li>Possible synchronization between systems through UGS option according to range documentation.</li> <li>Architecture designed for critical three-phase loads.</li> </ul> <h4>Integration process</h4> <p>The integration process requires source analysis, priority source definition, load wiring, synchronization checks and transfer tests. Commissioning must be carried out by qualified personnel.</p> <h4>Configuration software</h4> <p>Management depends on the system configuration, communication accessories and technical procedures required for static transfer. During commissioning, technicians should also record wiring, protection coordination, alarm mapping and final operating settings so that future maintenance can reproduce the same safe operating conditions. This approach improves traceability in professional installations and supports correct interaction between the accessory, the UPS and the protected load.</p> <h4>Riello compatibility</h4> <p>The Riello compatibility or reference series is: Master Switch Three-phase MTS.</p> </div> </div>