XBRIRS485ET - CABUR

Name: XBRIRS485ET - CABUR
Brand: Cabur
SKU: XBRIRS485ET
Availability: OutOfStock

Cabur

比较

Bri-GRE485-ET Bridge RS485-Ethernet Bri-GRE485-ET Bridge RS485-Ethernet

MPNs XBRIRS485ET, CBRXBRIRS485ET

EAN 8017963212397

税则号 8517620000

原籍国 意大利

Weight 0.15 kg

产品图片仅供参考，具体以实物为准
原产国、HS 编码和产品描述由制造商提供，如有变更，恕不另行通知。因此，PLC-City 不对任何差异承担责任。

由 PLC-CITY® 销售并从意大利发货

安全支付

等等

我们接受多种支付方式：银行转账（SEPA，ACH）、借记卡/信用卡（万事达、VISA、美国运通、大来、Discover、JCB、银联）、PayPal、ApplePay、GooglePay、Stripe链接支付、Cartes Bancaires、支付宝、Bancontact、blik、eps、giropay、iDeal、Przelewy24、微信支付。
有关我们付款方式的更多信息

12个月保修

本产品享有12个月的保修期，保修范围涵盖制造缺陷或故障。保修不包括因不当使用或意外损坏造成的损害。
进一步了解我们的保固

30天内可申请退货

退货须经预先批准，仅可获得商店积分。预订商品不在退货范围内。

查看我们的退货策略

可应要求

产品信息

描述

The Xbri series consists of two different types of interconnection bridge. The XBRERS485EET device is a gateway that allows you to connect the modbus -rto devices on an RS485 network to an Ethernet network based on Modbus-TCP. The XBRERS485ET and XBRERS48WI devices are two bridges that allow you to connect devices with RS485 communication (with any protocol) to an Ethernet network (Ethernet 1/1 Base T) based on TCP/IP protocol stack or to create transparent links to the user for Means of standard computer networks. The communication from Ethernet to RS485 takes place through a virtual communication door. The Ethernet communication speed can be set to 1mbit/s or 1mbit/s. Through the Telnet interface it is possible to configure the parameters of the device (IP address, subnet mask, etc.). The Xbri series consists of two different types of interconnection bridge. The XBRERS485EET device is a gateway that allows you to connect the modbus -rto devices on an RS485 network to an Ethernet network based on Modbus-TCP. The XBRERS485ET and XBRERS48WI devices are two bridges that allow you to connect devices with RS485 communication (with any protocol) to an Ethernet network (Ethernet 1/1 Base T) based on TCP/IP protocol stack or to create transparent links to the user for Means of standard computer networks. The communication from Ethernet to RS485 takes place through a virtual communication door. The Ethernet communication speed can be set to 1mbit/s or 1mbit/s. Through the Telnet interface it is possible to configure the parameters of the device (IP address, subnet mask, etc.).