VBA-2E2A-G2-ZEJ/XE2J PEPPERL+FUCHS - Part number: 192523
可应要求

立即获取您的个性化报价

专门的销售代表将帮助您提供最佳的价格和交货时间。

必须记录您

VBA-2E2A-G2-ZEJ/XE2J PEPPERL+FUCHS - Part number: 192523

PEPPERL+FUCHS

比较
VBA-2E2A-G2-ZEJ/XE2J PEPPERL+FUCHS - Part number: 192523

AS-Interface sensor/actuator module VBA-2E2A-G2-ZEJ/XE2J VBA-2E2A-G2-ZEJ/XE2J AS-Interface certificate Degree of protection IP67 A/B node with extended addressing possibility for up to 62 nodes Addressing jack Flat cable connection with cable piercing technique, variable flat cable guide Communication monitoring Inputs for 2- and 3-wire sensors Supply of the inputs and the outputs from AS-Interface Two MOVI-SWITCH-1E, controllable by SEW Ground connection (FE) possible Function display for bus, inputs and outputs Detection of overload on sensor supply Detection of output overload AS-Interface sensor/actuator module VBA-2E2A-G2-ZEJ/XE2J VBA-2E2A-G2-ZEJ/XE2J AS-Interface certificate Degree of protection IP67 A/B node with extended addressing possibility for up to 62 nodes Addressing jack Flat cable connection with cable piercing technique, variable flat cable guide Communication monitoring Inputs for 2- and 3-wire sensors Supply of the inputs and the outputs from AS-Interface Two MOVI-SWITCH-1E, controllable by SEW Ground connection (FE) possible Function display for bus, inputs and outputs Detection of overload on sensor supply Detection of output overload

MPNs 192523, PEP192523, VBA-2E2A-G2-ZEJ/XE2J
税则号 85371091
Weight 0.1 kg
产品图片仅供参考，具体以实物为准
原产国、HS 编码和产品描述由制造商提供，如有变更，恕不另行通知。因此，PLC-City 不对任何差异承担责任。
由 PLC-CITY® 销售并从意大利发货

我们接受多种支付方式：银行转账（SEPA，ACH）、借记卡/信用卡（万事达、VISA、美国运通、大来、Discover、JCB、银联）、PayPal、ApplePay、GooglePay、Stripe链接支付、Cartes Bancaires、支付宝、Bancontact、blik、eps、giropay、iDeal、Przelewy24、微信支付。
有关我们付款方式的更多信息

本产品享有12个月的保修期，保修范围涵盖制造缺陷或故障。保修不包括因不当使用或意外损坏造成的损害。
进一步了解我们的保固

退货须经预先批准，仅可获得商店积分。预订商品不在退货范围内。

查看我们的退货策略

可应要求

立即获取您的个性化报价

专门的销售代表将帮助您提供最佳的价格和交货时间。

必须记录您

产品信息

描述

Datasheet excerpt: Technical data of  VBA-2E2A-G2-ZEJ/XE2J Product Description G2 flat module2 inputs (PNP) and 2 electronic outputs General specifications Node typeA/B node AS-Interface specificationV3.0 Required gateway specification≥ V2.1 UL File NumberE223772 Indicators/operating means LED FAULTerror display; LED redred: communication error or address is 0red flashing: overload of sensor power supply or outputs LED PWRAS-Interface voltage; LED green LED INswitching state (input); 2 LED yellow LED OUTSwitching state (output); 2 LED yellow Electrical specifications Rated operating voltage26.5 ... 31.6 V from AS-Interface Rated operating current≤ 40 mA (without sensors) / max. 170 mA Protection classIII Surge protectionUe: Over voltage category III, safe isolated power supplies (PELV) Input Number/Type2 inputs for 2- or 3-wire sensors (PNP), DC Supplyfrom AS-Interface Voltage21 ... 31 V Current loading capacity≤ 130 mA (TB ≤ 40 °C),≤ 100 mA (TB ≤ 60 °C), overload and short-circuit protected Input current≤ 8 mA (limited internally) Switching pointaccording to DIN EN 61131-2 (Type 2) 0 (unattenuated)≤ 2 mA 1 (attenuated)≥ 4 mA Output Number/Type2 electronic outputs, PNP overload and short-circuit proof Supplyfrom AS-Interface Currentlimited by the current loading capacity of the module Directive conformity Electromagnetic compatibility Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001 Standard conformity Degree of protectionEN 60529:2000 InputEN 61131-2:2007 Emitted interferenceEN 61000-6-4:2001 AS-InterfaceEN 62026-2:2013 Noise immunityEN 61000-6-2:2001 Programming instructions ProfileS-B.A.E IO codeB ID codeA ID1 code7 ID2 codeE Data bits (function via AS-Interface)InputOutput D0 - OUT1 D1 - OUT2 D2 IN3 - D3 IN4 - Parameter bits (programmable via AS-i)function P0not used P1not used P2not used P3not used Ambient conditions Ambient temperature-25 ... 60 °C (-13 ... 140 °F) Storage temperature-25 ... 85 °C (-13 ... 185 °F) Relative humidity85 % , noncondensing Climatic conditionsFor indoor use only Altitude≤ 2000 m above MSL Pollution degree3 Mechanical specifications Degree of protectionIP67 Connectioncable piercing method: flat cable yellowinputs/outputs: M12 round connector Material HousingPBT Mass100 g Tightening torque, cable gland0.4 Nm MountingMounting plate Classifications SystemClasscode ECLASS 11.027242604 ECLASS 10.0.127242604 ECLASS 9.027242604 ECLASS 8.027242604 ECLASS 5.127242604 ETIM 8.0EC001599 ETIM 7.0EC001599 ETIM 6.0EC001599 ETIM 5.0EC001599 UNSPSC 12.139121535 Datasheet excerpt: Technical data of  VBA-2E2A-G2-ZEJ/XE2J Product Description G2 flat module2 inputs (PNP) and 2 electronic outputs General specifications Node typeA/B node AS-Interface specificationV3.0 Required gateway specification≥ V2.1 UL File NumberE223772 Indicators/operating means LED FAULTerror display; LED redred: communication error or address is 0red flashing: overload of sensor power supply or outputs LED PWRAS-Interface voltage; LED green LED INswitching state (input); 2 LED yellow LED OUTSwitching state (output); 2 LED yellow Electrical specifications Rated operating voltage26.5 ... 31.6 V from AS-Interface Rated operating current≤ 40 mA (without sensors) / max. 170 mA Protection classIII Surge protectionUe: Over voltage category III, safe isolated power supplies (PELV) Input Number/Type2 inputs for 2- or 3-wire sensors (PNP), DC Supplyfrom AS-Interface Voltage21 ... 31 V Current loading capacity≤ 130 mA (TB ≤ 40 °C),≤ 100 mA (TB ≤ 60 °C), overload and short-circuit protected Input current≤ 8 mA (limited internally) Switching pointaccording to DIN EN 61131-2 (Type 2) 0 (unattenuated)≤ 2 mA 1 (attenuated)≥ 4 mA Output Number/Type2 electronic outputs, PNP overload and short-circuit proof Supplyfrom AS-Interface Currentlimited by the current loading capacity of the module Directive conformity Electromagnetic compatibility Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001 Standard conformity Degree of protectionEN 60529:2000 InputEN 61131-2:2007 Emitted interferenceEN 61000-6-4:2001 AS-InterfaceEN 62026-2:2013 Noise immunityEN 61000-6-2:2001 Programming instructions ProfileS-B.A.E IO codeB ID codeA ID1 code7 ID2 codeE Data bits (function via AS-Interface)InputOutput D0 - OUT1 D1 - OUT2 D2 IN3 - D3 IN4 - Parameter bits (programmable via AS-i)function P0not used P1not used P2not used P3not used Ambient conditions Ambient temperature-25 ... 60 °C (-13 ... 140 °F) Storage temperature-25 ... 85 °C (-13 ... 185 °F) Relative humidity85 % , noncondensing Climatic conditionsFor indoor use only Altitude≤ 2000 m above MSL Pollution degree3 Mechanical specifications Degree of protectionIP67 Connectioncable piercing method: flat cable yellowinputs/outputs: M12 round connector Material HousingPBT Mass100 g Tightening torque, cable gland0.4 Nm MountingMounting plate Classifications SystemClasscode ECLASS 11.027242604 ECLASS 10.0.127242604 ECLASS 9.027242604 ECLASS 8.027242604 ECLASS 5.127242604 ETIM 8.0EC001599 ETIM 7.0EC001599 ETIM 6.0EC001599 ETIM 5.0EC001599 UNSPSC 12.139121535

最常与之一起购买

公司评介

Trustpilot