NCN40-FP-W-T-P2 PEPPERL+FUCHS - Part number: 905101
Available on request

Get your personalized quote now

A dedicated sales representative will assist you to offer the best price and delivery times.

You must be logged

NCN40-FP-W-T-P2 PEPPERL+FUCHS - Part number: 905101

PEPPERL+FUCHS

Inductive sensor NCN40-FP-W-T-P2 NCN40-FP-W-T-P2 Temperature range-25 ... 100 °C (-13 ... 212 °F) Inductive sensor NCN40-FP-W-T-P2 NCN40-FP-W-T-P2 Temperature range-25 ... 100 °C (-13 ... 212 °F)

MPNs 905101, PEP905101, NCN40-FP-W-T-P2
HS Code 85365090
Weight N/A

The product image is for illustrative purposes only.
The country of origin, HS code, and description are provided by the manufacturer and may be subject to change without prior notice. For this reason, PLC-City cannot be held responsible for any discrepancies.
Sold by PLC-CITY® and shipped from Italy

We accept many payment methods: Bank Transfer (SEPA, ACH), Debit/Credit Cards (Mastercard, VISA, American Express, Diners Club, Discover, JCB, UnionPay), PayPal, ApplePay, GooglePay, link by Stripe, Cartes Bancaires, Alipay, Bancontact, blik, eps, giropay iDeal, Przelewy24, WeChatPay.
More information about our payment methods

This product is covered by a 12 Months warranty, valid for manufacturing defects or malfunctions. The warranty does not cover damage caused by improper use or accidental damage.
Learn more about our warranty

Returns are subject to prior authorization and eligible for store credit only. Backordered items are excluded.

View our return policy

Available on request

Get your personalized quote now

A dedicated sales representative will assist you to offer the best price and delivery times.

You must be logged

Request your tailored technical service

Rely on our expert technical team for a range of personalized services: repair, programming, maintenance, and much more.

Product information

Description

Datasheet excerpt: Technical data of  NCN40-FP-W-T-P2 General specifications Switching functionNormally open/closed (NO/NC) Output typeTwo-wire Rated operating distance40 mm Installationnon-flush Output polarityAC Assured operating distance0 ... 32.4 mm Reduction factor rAl 0.4 Reduction factor rCu 0.3 Reduction factor r304 0.85 Output type2-wire Nominal ratings Operating voltage AC20 ... 253 V 1) Switching frequency0 ... 20 Hz Hysteresistyp. 3 % Short-circuit protectionno Voltage drop≤ 5 V typ. 4V Momentary current(20 ms, 0.1 Hz)max. 3000 mA Operating current5 ... 500 mA Off-state current0.3 ... 1 mA typ. 0.7 mA Time delay before availability≤ 100 ms Operating voltage indicatorLED, green Switching state indicatorLED, yellow Compliance with standards and directives Standard conformity StandardsEN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 Approvals and certificates UL approvalcULus Listed, General Purpose CSA approvalcCSAus Listed, General Purpose Ambient conditions Ambient temperature-25 ... 100 °C (-13 ... 212 °F) Mechanical specifications Connection typescrew terminals Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % Core cross sectionup to 2.5 mm2 Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 Housing materialPBT housing/PBT base Sensing facePBT Housing basePBT Degree of protectionIP68 Tightening torque, housing screws1 Nm Note1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. Classifications SystemClasscode ECLASS 11.027270101 ECLASS 10.0.127270101 ECLASS 9.027270101 ECLASS 8.027270101 ECLASS 5.127270101 ETIM 8.0EC002714 ETIM 7.0EC002714 ETIM 6.0EC002714 ETIM 5.0EC002714 UNSPSC 12.139121550 Datasheet excerpt: Technical data of  NCN40-FP-W-T-P2 General specifications Switching functionNormally open/closed (NO/NC) Output typeTwo-wire Rated operating distance40 mm Installationnon-flush Output polarityAC Assured operating distance0 ... 32.4 mm Reduction factor rAl 0.4 Reduction factor rCu 0.3 Reduction factor r304 0.85 Output type2-wire Nominal ratings Operating voltage AC20 ... 253 V 1) Switching frequency0 ... 20 Hz Hysteresistyp. 3 % Short-circuit protectionno Voltage drop≤ 5 V typ. 4V Momentary current(20 ms, 0.1 Hz)max. 3000 mA Operating current5 ... 500 mA Off-state current0.3 ... 1 mA typ. 0.7 mA Time delay before availability≤ 100 ms Operating voltage indicatorLED, green Switching state indicatorLED, yellow Compliance with standards and directives Standard conformity StandardsEN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 Approvals and certificates UL approvalcULus Listed, General Purpose CSA approvalcCSAus Listed, General Purpose Ambient conditions Ambient temperature-25 ... 100 °C (-13 ... 212 °F) Mechanical specifications Connection typescrew terminals Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % Core cross sectionup to 2.5 mm2 Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 Housing materialPBT housing/PBT base Sensing facePBT Housing basePBT Degree of protectionIP68 Tightening torque, housing screws1 Nm Note1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. Classifications SystemClasscode ECLASS 11.027270101 ECLASS 10.0.127270101 ECLASS 9.027270101 ECLASS 8.027270101 ECLASS 5.127270101 ETIM 8.0EC002714 ETIM 7.0EC002714 ETIM 6.0EC002714 ETIM 5.0EC002714 UNSPSC 12.139121550

Our Company Reviews