VAA-2E1A-G10-SAJ/EA2J-2M-V1-G PEPPERL+FUCHS - Part number: 264991

Datasheet excerpt: Technical data of  VAA-2E1A-G10-SAJ/EA2J-2M-V1-G Product Description G10 safety module2 safety inputs and1 standard electronic output General specifications Node typeSafety-Slave AS-Interface specificationV3.0 Required master specification≥ V2.1 UL File NumberE223772 "For use in NFPA 79 Applications only" Indicators/operating means LED FLTerror display; LED redred: communication error or address is 0 LED AS-iAS-Interface voltage; green LEDgreen: voltage OKflashing green: address 0 LED INswitching state (input); 2 LED yellow LED OUTSwitching state (output); LED yellow Electrical specifications Rated operating voltage26.5 ... 31.6 V from AS-Interface (PELV) Rated operating current≤ 90 mA Protection classIII Surge protectionovervoltage category III Rated insulation voltage32 V Pulse withstand voltage0.8 kV Input Number/Type2 safety-related inputs for mechanical contacts, crossed-circuit monitored:2 single-channel contacts: up to category 2/PL c to ISO 13849-1 or1 2-channel contact: up to category 4/PL e to ISO 13849-1 Supplyfrom AS-Interface Voltage20 ... 30 V DC pulsed Currentinput current limited ≤ 15 mA,short-circuit protected Output Number/Type1 conventional electronic output, PNP Supplyfrom AS-Interface Voltage(UASI - 7.0 V) ≤ UOUT ≤ UASI Current50 mA , short-circuit/overload protected Directive conformity Electromagnetic compatibility Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007 Machinery Directive Directive 2006/42/ECEN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 Standard conformity Degree of protectionEN 60529:2000 Fieldbus standardEN 62026-2:2013 Electrical safetyIEC 61140:2009 Emitted interferenceEN 61000-6-4:2007 AS-InterfaceEN 62026-2:2013 Noise immunityIEC 62026-2:2013 EN 62061:2005 EN 61000-6-2:2005 Functional safetyEN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 Programming instructions ProfileS-7.B IO code7 ID codeB ID1 codeF ID2 code0 Data bits (function via AS-Interface) input output D0 dyn. safety code 1 OUT 1 D1 dyn. safety code 1 - D2 dyn. safety code 2 - D3 dyn. safety code 2 - Parameter bits (programmable via AS-i)function P0communication monitoringP0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition P1not used P2not used P3not used Approvals and certificates UL approvalcULus Listed, Type 1 enclosure Ambient conditions Ambient temperature-20 ... 60 °C (-4 ... 140 °F) Storage temperature-25 ... 80 °C (-13 ... 176 °F) Relative humidity< 95 % Altitude≤ 2000 m above MSL Shock and impact resistance30 g, 11 ms in 6 spatial directions 3 shocks10 g, 16 ms in 6 spatial directions 1000 shocks Vibration resistance0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles Pollution degree3 Mechanical specifications Contact elementsspring-loaded contact socket Degree of protectionIP67This protection class is achieved by using the AS-Interface flat cable VAZ-FK-S-YE ConnectionAS-Interface: AS-Interface flat cable Inputs/outputs: M12 x 1 socket, 8-pin Material ContactsCuSn / Au Contact surfaceAu HousingPBT BodyTPU, black CablePUR Slotted nutDiecast zinc Mounting screwStainless steel 1.4305 / AISI 303 Cable Sheath diameter∅4.8 mm Bending radius> 8 x cable diameter, fixed > 10 x cable diameter, moving not appropriate for conveyor chains Colorblack Cores6 x 0.25 mm2 Length2 m Mass200 g Tightening torque, fastening screws1.65 Nm Tightening torque, cable gland0.4 Nm Classifications SystemClasscode ECLASS 11.027242604 ECLASS 10.0.127242604 ECLASS 9.027242604 ECLASS 8.027242604 ECLASS 5.127242604 ETIM 8.0EC001599 ETIM 7.0EC001599 ETIM 6.0EC001599 ETIM 5.0EC001599 UNSPSC 12.139121535 Datasheet excerpt: Technical data of  VAA-2E1A-G10-SAJ/EA2J-2M-V1-G Product Description G10 safety module2 safety inputs and1 standard electronic output General specifications Node typeSafety-Slave AS-Interface specificationV3.0 Required master specification≥ V2.1 UL File NumberE223772 "For use in NFPA 79 Applications only" Indicators/operating means LED FLTerror display; LED redred: communication error or address is 0 LED AS-iAS-Interface voltage; green LEDgreen: voltage OKflashing green: address 0 LED INswitching state (input); 2 LED yellow LED OUTSwitching state (output); LED yellow Electrical specifications Rated operating voltage26.5 ... 31.6 V from AS-Interface (PELV) Rated operating current≤ 90 mA Protection classIII Surge protectionovervoltage category III Rated insulation voltage32 V Pulse withstand voltage0.8 kV Input Number/Type2 safety-related inputs for mechanical contacts, crossed-circuit monitored:2 single-channel contacts: up to category 2/PL c to ISO 13849-1 or1 2-channel contact: up to category 4/PL e to ISO 13849-1 Supplyfrom AS-Interface Voltage20 ... 30 V DC pulsed Currentinput current limited ≤ 15 mA,short-circuit protected Output Number/Type1 conventional electronic output, PNP Supplyfrom AS-Interface Voltage(UASI - 7.0 V) ≤ UOUT ≤ UASI Current50 mA , short-circuit/overload protected Directive conformity Electromagnetic compatibility Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007 Machinery Directive Directive 2006/42/ECEN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 Standard conformity Degree of protectionEN 60529:2000 Fieldbus standardEN 62026-2:2013 Electrical safetyIEC 61140:2009 Emitted interferenceEN 61000-6-4:2007 AS-InterfaceEN 62026-2:2013 Noise immunityIEC 62026-2:2013 EN 62061:2005 EN 61000-6-2:2005 Functional safetyEN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 Programming instructions ProfileS-7.B IO code7 ID codeB ID1 codeF ID2 code0 Data bits (function via AS-Interface) input output D0 dyn. safety code 1 OUT 1 D1 dyn. safety code 1 - D2 dyn. safety code 2 - D3 dyn. safety code 2 - Parameter bits (programmable via AS-i)function P0communication monitoringP0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition P1not used P2not used P3not used Approvals and certificates UL approvalcULus Listed, Type 1 enclosure Ambient conditions Ambient temperature-20 ... 60 °C (-4 ... 140 °F) Storage temperature-25 ... 80 °C (-13 ... 176 °F) Relative humidity< 95 % Altitude≤ 2000 m above MSL Shock and impact resistance30 g, 11 ms in 6 spatial directions 3 shocks10 g, 16 ms in 6 spatial directions 1000 shocks Vibration resistance0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles Pollution degree3 Mechanical specifications Contact elementsspring-loaded contact socket Degree of protectionIP67This protection class is achieved by using the AS-Interface flat cable VAZ-FK-S-YE ConnectionAS-Interface: AS-Interface flat cable Inputs/outputs: M12 x 1 socket, 8-pin Material ContactsCuSn / Au Contact surfaceAu HousingPBT BodyTPU, black CablePUR Slotted nutDiecast zinc Mounting screwStainless steel 1.4305 / AISI 303 Cable Sheath diameter∅4.8 mm Bending radius> 8 x cable diameter, fixed > 10 x cable diameter, moving not appropriate for conveyor chains Colorblack Cores6 x 0.25 mm2 Length2 m Mass200 g Tightening torque, fastening screws1.65 Nm Tightening torque, cable gland0.4 Nm Classifications SystemClasscode ECLASS 11.027242604 ECLASS 10.0.127242604 ECLASS 9.027242604 ECLASS 8.027242604 ECLASS 5.127242604 ETIM 8.0EC001599 ETIM 7.0EC001599 ETIM 6.0EC001599 ETIM 5.0EC001599 UNSPSC 12.139121535