PGV-CTM-2x2 PEPPERL+FUCHS - Part number: 70127529

Datasheet excerpt: Technical data of  PGV-CTM2x2 Product Description Metal Data Matrix tag for PGV system General specifications Number interval1 ... 99999999 = TAG number (see Order Information) Ambient conditions Operating temperature-40 ... 80 °C (-40 ... 176 °F) Installation temperature10 ... 40 °C (50 ... 104 °F) Environmental resistanceUV radiation Humidity Chemical resistanceOils Grease Fuels Aliphatic solvents Weak acids Mechanical specifications Material thickness0.5 mm MaterialAluminum Mass3 g Manufacturing tolerance AdhesiveAcrylate-based adhesive ; curing 72 h Adhesive strengthAverage values (FTM2) Metal (stainless steel, aluminum) : 33 N / 25 mm ABS : 32 N / 25 mm PP : 31 N / 25 mm NoteTo achieve a good bonding bond, the material surfaces to be bonded must be absolutely dry and clean. For cleaning, fat-free solvents such as n-heptane or isopropyl alcohol are recommended.During bonding, the pressure should be as high as possible and the temperature should be at least +10°C.The higher the pressure and temperature, the better the adhesive penetrates the pores of the substrate and the higher the bonding values can be expected. General information Ordering informationThe required tag numbers are entered in the additional text for the job in the form of the start and end position. The order quantity must match the specified range. Classifications SystemClasscode ECLASS 11.027270792 ECLASS 10.0.127270792 ECLASS 9.027270792 ECLASS 8.027319290 ECLASS 5.127310290 ETIM 8.0EC003015 ETIM 7.0EC003015 ETIM 6.0EC003015 ETIM 5.0EC003015 UNSPSC 12.143211711 Datasheet excerpt: Technical data of  PGV-CTM2x2 Product Description Metal Data Matrix tag for PGV system General specifications Number interval1 ... 99999999 = TAG number (see Order Information) Ambient conditions Operating temperature-40 ... 80 °C (-40 ... 176 °F) Installation temperature10 ... 40 °C (50 ... 104 °F) Environmental resistanceUV radiation Humidity Chemical resistanceOils Grease Fuels Aliphatic solvents Weak acids Mechanical specifications Material thickness0.5 mm MaterialAluminum Mass3 g Manufacturing tolerance AdhesiveAcrylate-based adhesive ; curing 72 h Adhesive strengthAverage values (FTM2) Metal (stainless steel, aluminum) : 33 N / 25 mm ABS : 32 N / 25 mm PP : 31 N / 25 mm NoteTo achieve a good bonding bond, the material surfaces to be bonded must be absolutely dry and clean. For cleaning, fat-free solvents such as n-heptane or isopropyl alcohol are recommended.During bonding, the pressure should be as high as possible and the temperature should be at least +10°C.The higher the pressure and temperature, the better the adhesive penetrates the pores of the substrate and the higher the bonding values can be expected. General information Ordering informationThe required tag numbers are entered in the additional text for the job in the form of the start and end position. The order quantity must match the specified range. Classifications SystemClasscode ECLASS 11.027270792 ECLASS 10.0.127270792 ECLASS 9.027270792 ECLASS 8.027319290 ECLASS 5.127310290 ETIM 8.0EC003015 ETIM 7.0EC003015 ETIM 6.0EC003015 ETIM 5.0EC003015 UNSPSC 12.143211711