订单满150欧元(最多10公斤)可享欧洲、美国和加拿大免费快递配送。
info
探索
-
Menu返回
-
品牌
-
- Technologies for:
-
Industry
-
-
- Automation
- Motors & Drives
- Safety
- Sensors
- Connect
- Signal Cables
- Weighing
- Valves & Controls
-
Industrial Plugs & Sockets
- Panel-mounted CEE socket outlet (IEC 60309)
- CEE coupling (IEC 60309)
- CEE plug (IEC 60309)
- CEE socket outlet combination (IEC 60309)
- CEE appliance inlet (IEC 60309)
- CEE socket outlet (IEC 60309)
- CEE socket outlet, disconnectable, with fuse (IEC 60309)
- 防爆CEE插座(IEC 60309)
- CEE 插头和插座附件/备件 (IEC 60309)
- 防爆 CEE 插头/耦合器 (IEC 60309)
- 防爆开关
- 测试与测量仪器附件和备件
- 能源监控
-
-
-
Building
-
-
- Green Power
- HVAC - Climatisation
- Lighting
- Monitor & Networking
- e-Mobility
-
Automation - Bus Systems
-
Control Elements
- Analogue input for bus system
- Basic module for bus system
- Binary input for bus system
- Central device for bus system
- Controller for home automation systems
- Display for bus system
- I/O device for bus system
- Logic component for bus system
- Signalling and operation panel for bus system
- Light control unit for bus system
- 总线系统室温控制器
- Sensors
- Actuators
- Bus Communications
- Programming
- Others
-
Control Elements
-
Domestic switching devices
- Socket outlet combinations
- Cover frames for domestic switching devices
- Mounting for labelling material
- Plug adapters
- Socket outlets
- Plugs with protective contact
- Inserts/covers for communication technology
- Installation switches
- Movement sensors/presence detectors complete
- Push buttons
- Control elements/cover plates for domestic switching devices
- USB power supplies
- Sensor elements for movement sensor
- 配电单元(PDU)
- Energy consumption indication
- Emergency call system devices
- 诊所安装系统设备
- Pluggable building installation systems
-
-
-
Electrification
-
-
- Cables
- Installation
-
Low Voltage
-
Cabinets & Enclosures
- Base/base element (enclosure/cabinet)
- Clima Control
- Door/operating panel (enclosure/cabinet)
- Electronic enclosure
- Empty cabinet
-
Energy distribution systems
- Accessories/spare parts for busbar trunks
- Accessories/spare parts for busbars
- Busbar couplers
- Busbar supports
- Busbar trunk units
- Cover caps for rail terminal bar
- Distributor assembly miniature circuit breakers (MCB)
- Distributor assembly terminal blocks
- Feed units for busbar trunk
- Main line branch terminals
- Meter cabinets equipped
- Mounting plates for distribution board
- Mounting rails
- Mounting systems for busbar trunk
- Phase barrier plates
- Tap off units for busbar trunk
- 小型配电箱
- 配电板面板
- 配电箱盖板
- Explosion proof enclosure/housing
- Front panel (enclosure/cabinet)
- Keys for enclosures/cabinets
- Lock systems for enclosure/cabinet
- Mounting accessories (enclosure/cabinet)
- Network cabinet
- Network/server enclosure
-
Circuit Breakers
- Auxiliary contact block
- Busbar adapters
- Device circuit breaker
- Earth leakage circuit breaker
- Fuse switch disconnector
- Fuses
- Main line circuit breaker
- Miniature circuit breaker (MCB)
- Off-load switches
-
Power Circuit Breakers
- Chassis part power circuit breaker
- Door coupling handles
- Handle for power circuit breaker
- Modification set for power circuit breaker
- Motor operator for power circuit-breaker
- Phase separation plate for power circuit breaker
- Shunt release (for power circuit breaker)
- Switch spool for power circuit breaker
- Trip block for power circuit-breaker
- Under voltage coil
- Wiring set for power circuit breaker
- Residual current circuit breaker (RCCB)
- Surge protection device for power supply systems
- Trip indicator
-
command devices (Buttons, selectors, indicators)
- Accessories/spare parts for command devices
- Accessories/spare parts for emergency stop pull cord switch
- Acoustic indicator
- Adapter for command devices
- Buttons
- Control circuit devices combination in enclosure
- Control switch, Joystick
- Emergency stop complete
- Emergency stop pull cord switch
- Enclosure for control circuit devices
- Foot switch
- Legend plate for control circuit devices
- Potentiometer for command devices
- Protective cap for command devices
- Selectors
- Signal towers
- Text plate for command devices
- Two-hand control device
- 指示灯 / 信号灯
- 指示灯 / 信号灯
- Contactors
- DIN 导轨适配器
- Filters for low-voltage
- Low Voltage Accessories
-
Motor start & protection
- Accessories/spare parts for electronic motor control and protection device
- Electronic overload relay
- Extension module for motor management device
- Motor management device
- Motor protection circuit-breaker
- Motor starter/motor starter combination
- Operator panel for Motor management device
- Soft starter
- Thermal overload relay
- Power supply
-
Relays
- (Fill) level monitoring relay
- Accessories/spare parts for switching relay
- Current monitoring relay
- Latching relay
- Optocoupler
- Relay socket
- Relays for thermistor protection (PTC)
- Residual current monitoring relay
- Residual current monitoring relay
- Solid state relay
- Speed-/standstill monitoring relay
- Speed-/standstill monitoring relay
- Switching relay
- Temperature monitoring relay
- Timer blocks
- Timer relay
- Voltage monitoring relay
- 安装继电器
- Surge protection module
- Switch disconnector (low voltage)
-
Terminal blocks
- (Knife) disconnect terminal block
- Accessories/spare parts for terminals
- Component plug terminal block
- Component terminal block
- Cross-connector for terminal block
- End bracket for terminal block
- Endplate and partition plate for terminal block
- Feed-through terminal block
- Fuse terminal block
- Ground terminal block
- Labelling for terminal block
- Multi level installation terminal block
- Sensor/actuator terminal block
- Shield connection clamp
- Single- and multi-pole terminal strip
- Terminal block connector
- Test plug for terminal blocks
- Transformers & coils
- 功率电容器
- 建筑工地用ASC配电箱
- 数据/信号线路浪涌保护
- 电池和电池模块
-
Cabinets & Enclosures
- Marking
- Optical and acoustic signalling
- UPS
-
-
-
Tools
-
- 联系我们
- 关于我们
- 促销
联系信息
-
PLC-City
Via Circumvallazione esterna 12
80025 Casandrino NA
意大利
Menu
-
Menu返回
-
品牌
-
- Technologies for:
-
Industry
-
-
- Automation
- Motors & Drives
- Safety
- Sensors
- Connect
- Signal Cables
- Weighing
- Valves & Controls
-
Industrial Plugs & Sockets
- Panel-mounted CEE socket outlet (IEC 60309)
- CEE coupling (IEC 60309)
- CEE plug (IEC 60309)
- CEE socket outlet combination (IEC 60309)
- CEE appliance inlet (IEC 60309)
- CEE socket outlet (IEC 60309)
- CEE socket outlet, disconnectable, with fuse (IEC 60309)
- 防爆CEE插座(IEC 60309)
- CEE 插头和插座附件/备件 (IEC 60309)
- 防爆 CEE 插头/耦合器 (IEC 60309)
- 防爆开关
- 测试与测量仪器附件和备件
- 能源监控
-
-
-
Building
-
-
- Green Power
- HVAC - Climatisation
- Lighting
- Monitor & Networking
- e-Mobility
-
Automation - Bus Systems
-
Control Elements
- Analogue input for bus system
- Basic module for bus system
- Binary input for bus system
- Central device for bus system
- Controller for home automation systems
- Display for bus system
- I/O device for bus system
- Logic component for bus system
- Signalling and operation panel for bus system
- Light control unit for bus system
- 总线系统室温控制器
- Sensors
- Actuators
- Bus Communications
- Programming
- Others
-
Control Elements
-
Domestic switching devices
- Socket outlet combinations
- Cover frames for domestic switching devices
- Mounting for labelling material
- Plug adapters
- Socket outlets
- Plugs with protective contact
- Inserts/covers for communication technology
- Installation switches
- Movement sensors/presence detectors complete
- Push buttons
- Control elements/cover plates for domestic switching devices
- USB power supplies
- Sensor elements for movement sensor
- 配电单元(PDU)
- Energy consumption indication
- Emergency call system devices
- 诊所安装系统设备
- Pluggable building installation systems
-
-
-
Electrification
-
-
- Cables
- Installation
-
Low Voltage
-
Cabinets & Enclosures
- Base/base element (enclosure/cabinet)
- Clima Control
- Door/operating panel (enclosure/cabinet)
- Electronic enclosure
- Empty cabinet
-
Energy distribution systems
- Accessories/spare parts for busbar trunks
- Accessories/spare parts for busbars
- Busbar couplers
- Busbar supports
- Busbar trunk units
- Cover caps for rail terminal bar
- Distributor assembly miniature circuit breakers (MCB)
- Distributor assembly terminal blocks
- Feed units for busbar trunk
- Main line branch terminals
- Meter cabinets equipped
- Mounting plates for distribution board
- Mounting rails
- Mounting systems for busbar trunk
- Phase barrier plates
- Tap off units for busbar trunk
- 小型配电箱
- 配电板面板
- 配电箱盖板
- Explosion proof enclosure/housing
- Front panel (enclosure/cabinet)
- Keys for enclosures/cabinets
- Lock systems for enclosure/cabinet
- Mounting accessories (enclosure/cabinet)
- Network cabinet
- Network/server enclosure
-
Circuit Breakers
- Auxiliary contact block
- Busbar adapters
- Device circuit breaker
- Earth leakage circuit breaker
- Fuse switch disconnector
- Fuses
- Main line circuit breaker
- Miniature circuit breaker (MCB)
- Off-load switches
-
Power Circuit Breakers
- Chassis part power circuit breaker
- Door coupling handles
- Handle for power circuit breaker
- Modification set for power circuit breaker
- Motor operator for power circuit-breaker
- Phase separation plate for power circuit breaker
- Shunt release (for power circuit breaker)
- Switch spool for power circuit breaker
- Trip block for power circuit-breaker
- Under voltage coil
- Wiring set for power circuit breaker
- Residual current circuit breaker (RCCB)
- Surge protection device for power supply systems
- Trip indicator
-
command devices (Buttons, selectors, indicators)
- Accessories/spare parts for command devices
- Accessories/spare parts for emergency stop pull cord switch
- Acoustic indicator
- Adapter for command devices
- Buttons
- Control circuit devices combination in enclosure
- Control switch, Joystick
- Emergency stop complete
- Emergency stop pull cord switch
- Enclosure for control circuit devices
- Foot switch
- Legend plate for control circuit devices
- Potentiometer for command devices
- Protective cap for command devices
- Selectors
- Signal towers
- Text plate for command devices
- Two-hand control device
- 指示灯 / 信号灯
- 指示灯 / 信号灯
- Contactors
- DIN 导轨适配器
- Filters for low-voltage
- Low Voltage Accessories
-
Motor start & protection
- Accessories/spare parts for electronic motor control and protection device
- Electronic overload relay
- Extension module for motor management device
- Motor management device
- Motor protection circuit-breaker
- Motor starter/motor starter combination
- Operator panel for Motor management device
- Soft starter
- Thermal overload relay
- Power supply
-
Relays
- (Fill) level monitoring relay
- Accessories/spare parts for switching relay
- Current monitoring relay
- Latching relay
- Optocoupler
- Relay socket
- Relays for thermistor protection (PTC)
- Residual current monitoring relay
- Residual current monitoring relay
- Solid state relay
- Speed-/standstill monitoring relay
- Speed-/standstill monitoring relay
- Switching relay
- Temperature monitoring relay
- Timer blocks
- Timer relay
- Voltage monitoring relay
- 安装继电器
- Surge protection module
- Switch disconnector (low voltage)
-
Terminal blocks
- (Knife) disconnect terminal block
- Accessories/spare parts for terminals
- Component plug terminal block
- Component terminal block
- Cross-connector for terminal block
- End bracket for terminal block
- Endplate and partition plate for terminal block
- Feed-through terminal block
- Fuse terminal block
- Ground terminal block
- Labelling for terminal block
- Multi level installation terminal block
- Sensor/actuator terminal block
- Shield connection clamp
- Single- and multi-pole terminal strip
- Terminal block connector
- Test plug for terminal blocks
- Transformers & coils
- 功率电容器
- 建筑工地用ASC配电箱
- 数据/信号线路浪涌保护
- 电池和电池模块
-
Cabinets & Enclosures
- Marking
- Optical and acoustic signalling
- UPS
-
-
-
Tools
-
- 联系我们
- 关于我们
- 促销
OMT150-R100-2EP-IO-L PEPPERL+FUCHS - Part number: 267075-100194
PEPPERL+FUCHS
Distance sensor OMT150-R100-2EP-IO-L OMT150-R100-2EP-IO-L Miniature design with versatile mounting options Space-saving distance sensors in small standardized design Multi Pixel Technology (MPT) - exact and precise signal evaluation DuraBeam Laser Sensors - durable and employable like an LED IO-Link interface for service and process data Distance sensor OMT150-R100-2EP-IO-L OMT150-R100-2EP-IO-L Miniature design with versatile mounting options Space-saving distance sensors in small standardized design Multi Pixel Technology (MPT) - exact and precise signal evaluation DuraBeam Laser Sensors - durable and employable like an LED IO-Link interface for service and process data
MPNs 267075-100194, PEP267075-100194, OMT150-R100-2EP-IO-L
税则号 85365000
Weight
N/A
产品图片仅供参考,具体以实物为准
原产国、HS 编码和产品描述由制造商提供,如有变更,恕不另行通知。因此,PLC-City 不对任何差异承担责任。
由 PLC-CITY® 销售并从意大利发货
安全支付
等等
我们接受多种支付方式:银行转账(SEPA,ACH)、借记卡/信用卡(万事达、VISA、美国运通、大来、Discover、JCB、银联)、PayPal、ApplePay、GooglePay、Stripe链接支付、Cartes Bancaires、支付宝、Bancontact、blik、eps、giropay、iDeal、Przelewy24、微信支付。
有关我们付款方式的更多信息
12个月 保修
本产品享有12个月的保修期,保修范围涵盖制造缺陷或故障。保修不包括因不当使用或意外损坏造成的损害。
进一步了解我们的保固
由 PLC-CITY® 销售并从意大利发货
我们是 PEPPERL+FUCHS 的专业合作伙伴
免费快递至 美国
查看所有运输服务
Shipping:
到
的
Estimated delivery:
The selected carrier does not apply to this product
请求报价以知道交货日期
安全支付
等等
我们接受多种支付方式:银行转账(SEPA,ACH)、借记卡/信用卡(万事达、VISA、美国运通、大来、Discover、JCB、银联)、PayPal、ApplePay、GooglePay、Stripe链接支付、Cartes Bancaires、支付宝、Bancontact、blik、eps、giropay、iDeal、Przelewy24、微信支付。
有关我们付款方式的更多信息
12个月 保修
本产品享有12个月的保修期,保修范围涵盖制造缺陷或故障。保修不包括因不当使用或意外损坏造成的损害。
进一步了解我们的保固
产品信息
描述
Datasheet excerpt: Technical data of
OMT150-R100-2EP-IO-L
Product Description
Measurement to object, 150 mm detection range, red laser light, laser class 1, measured value via IO-Link, 2 x push-pull output, 2 m fixed cable
General specifications
Measurement range60 ... 150 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourcelaser diode
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class1
Wave length680 nm
Beam divergence> 5 mrad d63 d63 < 1 mm in the range of 50 mm ... 250 mm
Pulse length3 µs
Repetition rate3 kHz
max. pulse energy15.2 nJ
Angle deviationmax. +/- 1.5 °
Diameter of the light spot2 mm at a distance of 150 mm
Opening angle1 °
Ambient light limitEN 60947-5-2 : 30000 Lux
Resolution0.1 mm
Functional safety related parameters
MTTFd560 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green:constantly on - power onflashing (4Hz) - short circuitflashing with short break (1 Hz) - IO-Link mode
Function indicatorLED yellow:constantly on - switch output activeconstantly off - switch output inactive
Control elementsTeach-In key
Control elements5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply current< 25 mA at 24 V supply voltage
Protection classIII
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
IO-Link revision1.1
Device profileSmart Sensor
Device ID0x110906 (1116422)
Transfer rateCOM2 (38.4 kBit/s)
Min. cycle time3 ms
Process data widthProcess data input 3 ByteProcess data output 2 Bit
SIO mode supportyes
Compatible master port typeA
Output
Switching typeThe default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link Q2 - WH: NPN normally open, PNP normally closed
Signal output2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Usage categoryDC-12 and DC-13
Voltage drop≤ 1.5 V DC
Response time2 ms
Conformity
Communication interfaceIEC 61131-9
Product standardEN 60947-5-2
Laser safetyEN 60825-1:2014
Approvals and certificates
EAC conformityTR CU 020/2011
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Measurement accuracy
Temperature drift0.05 %/K
Warm up time5 min
Repeat accuracy≤ 1 %
Linearity error± 1 %
Ambient conditions
Ambient temperature10 ... 60 °C (50 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width11 mm
Housing height44.5 mm
Housing depth21.5 mm
Degree of protectionIP67 / IP69 / IP69K
Connection2 m fixed cable
Material
HousingPC (Polycarbonate)
Optical facePMMA
Mass36 g
Cable length2 m
Classifications
SystemClasscode
ECLASS 11.027270903
ECLASS 10.0.127270903
ECLASS 9.027270903
ECLASS 8.027270903
ECLASS 5.127270903
ETIM 8.0EC001821
ETIM 7.0EC001821
ETIM 6.0EC001821
ETIM 5.0EC001821
UNSPSC 12.139121528
Datasheet excerpt: Technical data of
OMT150-R100-2EP-IO-L
Product Description
Measurement to object, 150 mm detection range, red laser light, laser class 1, measured value via IO-Link, 2 x push-pull output, 2 m fixed cable
General specifications
Measurement range60 ... 150 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourcelaser diode
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class1
Wave length680 nm
Beam divergence> 5 mrad d63 d63 < 1 mm in the range of 50 mm ... 250 mm
Pulse length3 µs
Repetition rate3 kHz
max. pulse energy15.2 nJ
Angle deviationmax. +/- 1.5 °
Diameter of the light spot2 mm at a distance of 150 mm
Opening angle1 °
Ambient light limitEN 60947-5-2 : 30000 Lux
Resolution0.1 mm
Functional safety related parameters
MTTFd560 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green:constantly on - power onflashing (4Hz) - short circuitflashing with short break (1 Hz) - IO-Link mode
Function indicatorLED yellow:constantly on - switch output activeconstantly off - switch output inactive
Control elementsTeach-In key
Control elements5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply current< 25 mA at 24 V supply voltage
Protection classIII
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
IO-Link revision1.1
Device profileSmart Sensor
Device ID0x110906 (1116422)
Transfer rateCOM2 (38.4 kBit/s)
Min. cycle time3 ms
Process data widthProcess data input 3 ByteProcess data output 2 Bit
SIO mode supportyes
Compatible master port typeA
Output
Switching typeThe default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link Q2 - WH: NPN normally open, PNP normally closed
Signal output2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Usage categoryDC-12 and DC-13
Voltage drop≤ 1.5 V DC
Response time2 ms
Conformity
Communication interfaceIEC 61131-9
Product standardEN 60947-5-2
Laser safetyEN 60825-1:2014
Approvals and certificates
EAC conformityTR CU 020/2011
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Measurement accuracy
Temperature drift0.05 %/K
Warm up time5 min
Repeat accuracy≤ 1 %
Linearity error± 1 %
Ambient conditions
Ambient temperature10 ... 60 °C (50 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width11 mm
Housing height44.5 mm
Housing depth21.5 mm
Degree of protectionIP67 / IP69 / IP69K
Connection2 m fixed cable
Material
HousingPC (Polycarbonate)
Optical facePMMA
Mass36 g
Cable length2 m
Classifications
SystemClasscode
ECLASS 11.027270903
ECLASS 10.0.127270903
ECLASS 9.027270903
ECLASS 8.027270903
ECLASS 5.127270903
ETIM 8.0EC001821
ETIM 7.0EC001821
ETIM 6.0EC001821
ETIM 5.0EC001821
UNSPSC 12.139121528