LFL2-CK-U-PUR5-EMS PEPPERL+FUCHS - Part number: 262201
NFS
缺货 - 延期交货
要从制造商订购
USD69.06

不含进口税

必须记录您

LFL2-CK-U-PUR5-EMS PEPPERL+FUCHS - Part number: 262201

PEPPERL+FUCHS

比较
LFL2-CK-U-PUR5-EMS PEPPERL+FUCHS - Part number: 262201

Float Switch LFL2-CK-U-PUR5-EMS LFL2-CK-U-PUR5-EMS Switch element: microswitch, mercury-free Limit value detection for fluids Sleeve design: small diameter, mounting through G1 tap hole possible Float Switch LFL2-CK-U-PUR5-EMS LFL2-CK-U-PUR5-EMS Switch element: microswitch, mercury-free Limit value detection for fluids Sleeve design: small diameter, mounting through G1 tap hole possible

MPNs 262201, PEP262201, LFL2-CK-U-PUR5-EMS
税则号 90321000
Weight N/A
产品图片仅供参考，具体以实物为准
原产国、HS 编码和产品描述由制造商提供，如有变更，恕不另行通知。因此，PLC-City 不对任何差异承担责任。
由 PLC-CITY® 销售并从意大利发货

我们接受多种支付方式：银行转账（SEPA，ACH）、借记卡/信用卡（万事达、VISA、美国运通、大来、Discover、JCB、银联）、PayPal、ApplePay、GooglePay、Stripe链接支付、Cartes Bancaires、支付宝、Bancontact、blik、eps、giropay、iDeal、Przelewy24、微信支付。
有关我们付款方式的更多信息

本产品享有12个月的保修期，保修范围涵盖制造缺陷或故障。保修不包括因不当使用或意外损坏造成的损害。
进一步了解我们的保固

退货须经预先批准，仅可获得商店积分。预订商品不在退货范围内。

查看我们的退货策略

NFS Condition NFS
全新出厂密封 - 原装
缺货 - 延期交货
要从制造商订购
USD69.06

不含进口税

必须记录您
由 PLC-CITY® 销售并从意大利发货
我们是 PEPPERL+FUCHS 的专业合作伙伴
至 美国 从 USD27.36 开始 由 DHL Express Worldwide
Loader...
查看所有运输服务
请求报价以知道交货日期

我们接受多种支付方式：银行转账（SEPA，ACH）、借记卡/信用卡（万事达、VISA、美国运通、大来、Discover、JCB、银联）、PayPal、ApplePay、GooglePay、Stripe链接支付、Cartes Bancaires、支付宝、Bancontact、blik、eps、giropay、iDeal、Przelewy24、微信支付。
有关我们付款方式的更多信息

本产品享有12个月的保修期，保修范围涵盖制造缺陷或故障。保修不包括因不当使用或意外损坏造成的损害。
进一步了解我们的保固

退货须经预先批准，仅可获得商店积分。预订商品不在退货范围内。

查看我们的退货策略

立即获取您的个性化报价

专门的销售代表将帮助您提供最佳的价格和交货时间。

必须记录您

产品信息

描述

Datasheet excerpt: Technical data of  LFL2-CK-U-PUR5-EMS Electrical specifications Contact loading250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load Rated insulation voltage300 V Pulse withstand voltage4 kV Electrical life≥ 5 x 104 switching cycles Directive conformity Low voltage Directive 2014/35/EUEN 60947-5-1:2004 + Cor.:2005 + A1:2009 Conformity Degree of protectionIEC 60529:2001 Application Descriptionmicroswitch with switching ball, change-over contact Function and system design Equipment architectureThis device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements. Operating conditions Installation conditions Installation instructionsrange of application and minimum length between mounting and float:≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluidsmounting:- The float switch is mounted either from sidewards through a cable gland ≥ G1A into the vessel or- by means of a counter weight or rods (e. g. float switch combination) from the top.The pivot of the cable should always be horizontal. Process conditions Process pressure (static pressure)≤ 3 bar (43.5 psi) at 20 °C (68 °F) Density≥ 0.8 g/cm3 Ambient conditions Ambient temperature5 ... 70 °C (41 ... 158 °F) Storage temperature-25 ... 70 °C (-13 ... 158 °F) Altitude≤ 2000 m above MSL Mechanical specifications Degree of protectionIP68 Cable Length5 m Mechanical construction Materialfloat: PP (Polypropylene)cable: PUR, highly flexible (3 x 0.50 mm2) Switching pointswitch angle, measured against the horizontal:- upper switch point +25° ±10°- lower switch point -14° ±10° General information Supplementary informationStatement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Classifications SystemClasscode ECLASS 11.027200510 ECLASS 10.0.127200510 ECLASS 9.027200510 ECLASS 8.027200510 ECLASS 5.127200510 ETIM 8.0EC011178 ETIM 7.0EC011178 ETIM 6.0EC001447 ETIM 5.0EC001447 UNSPSC 12.141111950 Datasheet excerpt: Technical data of  LFL2-CK-U-PUR5-EMS Electrical specifications Contact loading250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load Rated insulation voltage300 V Pulse withstand voltage4 kV Electrical life≥ 5 x 104 switching cycles Directive conformity Low voltage Directive 2014/35/EUEN 60947-5-1:2004 + Cor.:2005 + A1:2009 Conformity Degree of protectionIEC 60529:2001 Application Descriptionmicroswitch with switching ball, change-over contact Function and system design Equipment architectureThis device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements. Operating conditions Installation conditions Installation instructionsrange of application and minimum length between mounting and float:≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluidsmounting:- The float switch is mounted either from sidewards through a cable gland ≥ G1A into the vessel or- by means of a counter weight or rods (e. g. float switch combination) from the top.The pivot of the cable should always be horizontal. Process conditions Process pressure (static pressure)≤ 3 bar (43.5 psi) at 20 °C (68 °F) Density≥ 0.8 g/cm3 Ambient conditions Ambient temperature5 ... 70 °C (41 ... 158 °F) Storage temperature-25 ... 70 °C (-13 ... 158 °F) Altitude≤ 2000 m above MSL Mechanical specifications Degree of protectionIP68 Cable Length5 m Mechanical construction Materialfloat: PP (Polypropylene)cable: PUR, highly flexible (3 x 0.50 mm2) Switching pointswitch angle, measured against the horizontal:- upper switch point +25° ±10°- lower switch point -14° ±10° General information Supplementary informationStatement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Classifications SystemClasscode ECLASS 11.027200510 ECLASS 10.0.127200510 ECLASS 9.027200510 ECLASS 8.027200510 ECLASS 5.127200510 ETIM 8.0EC011178 ETIM 7.0EC011178 ETIM 6.0EC001447 ETIM 5.0EC001447 UNSPSC 12.141111950

最常与之一起购买

公司评介

Trustpilot