Relays for thermistor protection (PTC) 153 products

Filter by
Price
USD USD
Manufacturers
Rated control supply voltage DC
Voltage type for actuating
Rated control supply voltage AC 50 Hz
Rated control supply voltage AC 60 Hz
Number of contacts as normally closed contact
Number of contacts as normally open contact
Number of contacts as change-over contact
Type of electric connection
Connection type auxiliary circuit
Number of measuring circuits
Temperature measuring range
Max. permitted delay-on energization time
External reset possible
Error registration possible
Voltage measuring range
Phase sequence monitoring
Phase failure detection
Min. adjustable delay-on energization time
Max. permitted off-delay time
Min. adjustable off-delay time
Rated control supply voltage
Filter
3RN2012-2BW31 Siemens
NFS

3RN2012-2BW31 Siemens

Thermistor motor protection relay Standard evaluation unit 22.5 mm enclosure Spring-type terminal 2 change-over contacts bistable US = 24 V-240 V AC/DC Manual/Auto/Remote reset 2 LEDs (READY/TRIPPED) galvanic isolation Test/reset button Wire break monitoring Short circuit monitoring non-volatile
compare
USD186.45 Price
Out of Stock - Backorder
3RN1013-1BB00 Siemens
used

3RN1013-1BB00 Siemens

!!! Phased-out product !!! The preferred successor is 3RN2013-1BA30 Thermistor motor protection Multifunctional evaluation unit Manual/Auto/Remote Short-circuit detection
compare
USD91.62 Price
Available 4
3RN1012-1CK00 Siemens
used

3RN1012-1CK00 Siemens

!!! Phased-out product !!! The preferred successor is 3RN2012-1BW30 Thermistor motor protection Standard evaluation unit Manual/Auto/Remote 1 NO + 1 NC 230/110 V AC screw terminal
compare
USD215.78 Price
Available 1
3RN1011-1CB00 Siemens
NWB

3RN1011-1CB00 Siemens

!!! Phased-out product !!! The preferred successor is 3RN2011-1BA30 Thermistor motor protection Standard evaluation unit MANUAL, 1 NO + 1 NC, 24 V AC/DC screw terminal
compare
USD76.85 Price
Available 1
JTA:TEF1203-0LB Siemens
NFS

JTA:TEF1203-0LB Siemens

SINAMICS G120 dv/dt filter with VPL voltage peak limiter 690V 110 - 132 kW 400V 55 kW - 75 kW SINAMICS Pool software V4.7 SP10 or higher is required for G120 application SINAMICS Pool software V5.1 SP1 or higher is required for S120 application
compare
USD4,172.53 Price
Out of Stock - Backorder
3RN2023-2DW30 Siemens
NFS

3RN2023-2DW30 Siemens

Thermistor motor protection relay Device for warning and switching-off 22.5 mm enclosure Spring-type terminal 1 NO contact + 1 CO contact US = 24 V-240 V AC/DC Manual/Auto/Remote reset with ATEX approval 3 LEDs (READY/WARNING/TRIPPED) Safe galvanic isolation Test/reset button Wire break monitoring Short circuit monitoring non-volatile 2 separate PTC sensor circuits
compare
USD204.86 Price
Out of Stock - Backorder
3RN2023-1DW30 Siemens
NFS

3RN2023-1DW30 Siemens

Thermistor motor protection relay Device for warning and switching-off 22.5 mm enclosure screw terminal 1 NO contact + 1 CO contact US = 24 V-240 V AC/DC Manual/Auto/Remote reset with ATEX approval 3 LEDs (READY/WARNING/TRIPPED) Safe galvanic isolation Test/reset button Wire break monitoring Short circuit monitoring non-volatile 2 separate PTC sensor circuits
compare
USD204.86 Price
Out of Stock - Backorder
3RN2013-2GW30 Siemens
NFS

3RN2013-2GW30 Siemens

Thermistor motor protection relay Standard evaluation unit 22.5 mm enclosure Spring-type terminal 2 change-over contacts hard gold-plated US = 24 V-240 V AC/DC Manual/Auto/Remote reset with ATEX approval 2 LEDs (READY/TRIPPED) Safe galvanic isolation Test/reset button Wire break monitoring Short circuit monitoring non-volatile
compare
USD150.89 Price
Out of Stock - Backorder
3RN2013-2BW30 Siemens
NFS

3RN2013-2BW30 Siemens

Thermistor motor protection relay Standard evaluation unit 22.5 mm enclosure Spring-type terminal 2 change-over contacts US = 24 V-240 V AC/DC Manual/Auto/Remote reset with ATEX approval 2 LEDs (READY/TRIPPED) Safe galvanic isolation Test/reset button Wire break monitoring Short circuit monitoring non-volatile
compare
USD143.51 Price
Out of Stock - Backorder