Auto-ranging 12/24 V, 10/16 A battery charge/discharge control module for DIN-rail mounting. Input data: 12/24 VDC, auto-ranging. Output data: 12 VDC, 16 A or 24 VDC, 10 A, 240 W. Equipped with 3 status LEDs indicating power supply input voltage present, load powered by the battery, and load supply output voltage present. A potential-free contact is provided as standard for status and alarm signalling. Charging capacity: 1 A DC. Compatible with sealed AGM lead-acid batteries up to 24 Ah. The module is equipped with an internal fuse for battery protection. Dimensions: 4 DIN modules. Operation: the KCCS is connected to the output of the power supply and to the battery, creating a DC UPS system. When mains power is available, the power supply feeds the KCCS, which in turn powers the load and recharges the battery. The KCCS protects the battery against deep charging and discharging cycles. In the event of a mains failure, the battery powers the KCCS, which supplies the load with a transfer time of 0 ms, ensuring uninterrupted and correct operation. Standards: EN IEC 62368-1; EN IEC 61000-6-1; EN IEC 61000-6-3.

DIN-rail redundancy module for power supply systems serving critical loads. Input data: 2 inputs, 9–30 VDC, up to 10 A per input. Output data: 9–30 VDC, 10 A. Transfer time: 0 ms. Electrical connection: screw terminal block with oversized 25 mm² terminals. Elegant aluminium housing. Operating temperature: -20 to +70 °C. Equipped with 3 front diagnostic LEDs and 3 potential-free contacts for fault indication. Operation: the device is connected to the outputs of two power supplies, each capable of powering the load independently. If one of the two power supplies fails, the redundancy module transfers the load to the remaining power supply within 0 ms and signals the fault through a dedicated potential-free contact. Standards and directives: EN IEC 61000-6-2; EN IEC 61000-6-4; EN IEC 62368-1; RoHS Directives 2011/65/EU and 2015/863/EU; REACH Regulation (EC) No. 1907/2006.

DIN-rail redundancy module for critical-load power supply systems, featuring gel coating protection for installation in harsh environments. Input data: 2 inputs, 9–30 VDC, up to 25 A per input. Output data: 9–30 VDC, 25 A. Transfer time: 0 ms. Electrical connection: screw terminal block with oversized 25 mm² terminals. Elegant aluminium housing. Operating temperature: -20 to +70 °C. Equipped with 3 front diagnostic LEDs and 3 potential-free contacts for fault indication. Operation: the device is connected to the outputs of two power supplies, each capable of powering the load independently. If one of the two power supplies fails, the redundancy module transfers the load to the remaining power supply within 0 ms and signals the fault through a dedicated potential-free contact. Standards and directives: EN IEC 61000-6-2; EN IEC 61000-6-4; EN IEC 62368-1; RoHS Directives 2011/65/EU and 2015/863/EU; REACH Regulation (EC) No. 1907/2006.

DIN-rail redundancy module for critical-load power supply systems. Input data: 2 inputs, 9–30 VDC, up to 25 A per input. Output data: 9–30 VDC, 25 A. Transfer time: 0 ms. Electrical connection: screw terminal block with oversized 25 mm² terminals. Elegant aluminium housing. Operating temperature: -20 to +70 °C. Equipped with 3 front diagnostic LEDs and 3 potential-free contacts for fault indication. Operation: the device is connected to the outputs of two power supplies, each capable of powering the load independently. If one of the two power supplies fails, the redundancy module transfers the load to the remaining power supply within 0 ms and signals the fault through a dedicated potential-free contact. Standards and directives: EN IEC 61000-6-2; EN IEC 61000-6-4; EN IEC 62368-1; RoHS Directives 2011/65/EU and 2015/863/EU; REACH Regulation (EC) No. 1907/2006.

DIN-rail redundancy module for critical-load power supply systems. Input data: 2 inputs, 40–60 VDC, up to 10 A per input. Output data: 40–60 VDC, 10 A. Transfer time: 0 ms. Electrical connection: screw terminal block with oversized 25 mm² terminals. Elegant aluminium housing. Operating temperature: -20 to +70 °C. Equipped with 3 front diagnostic LEDs and 3 potential-free contacts for fault indication. Operation: the device is connected to the outputs of two power supplies, each capable of powering the load independently. If one of the two power supplies fails, the redundancy module transfers the load to the remaining power supply within 0 ms and signals the fault through a dedicated potential-free contact. Standards and directives: EN IEC 61000-6-2; EN IEC 61000-6-4; EN IEC 62368-1; RoHS Directives 2011/65/EU and 2015/863/EU; REACH Regulation (EC) No. 1907/2006.

DIN-rail redundancy module for critical-load power supply systems, featuring protective gel coating for installation in harsh environments. Input data: 2 inputs, 40–60 VDC, up to 25 A per input. Output data: 40–60 VDC, 25 A. Transfer time: 0 ms. Electrical connection: screw terminal block with oversized 25 mm² terminals. Elegant aluminium housing. Operating temperature: -20 to +70 °C. Equipped with 3 front diagnostic LEDs and 3 potential-free contacts for fault indication. Operation: the device is connected to the outputs of two power supplies, each capable of powering the load independently. If one of the two power supplies fails, the redundancy module transfers the load to the remaining power supply within 0 ms and signals the fault through a dedicated potential-free contact. Standards and directives: EN IEC 61000-6-2; EN IEC 61000-6-4; EN IEC 62368-1; RoHS Directives 2011/65/EU and 2015/863/EU; REACH Regulation (EC) No. 1907/2006.

DIN-rail redundancy module for critical-load power supply systems. Input data: 2 inputs, 40–60 VDC, up to 25 A per input. Output data: 40–60 VDC, 25 A. Transfer time: 0 ms. Electrical connection: screw terminal block with oversized 25 mm² terminals. Elegant aluminium housing. Operating temperature: -20 to +70 °C. Equipped with 3 front diagnostic LEDs and 3 potential-free contacts for fault indication. Operation: the device is connected to the outputs of two power supplies, each capable of powering the load independently. If one of the two power supplies fails, the redundancy module transfers the load to the remaining power supply within 0 ms and signals the fault through a dedicated potential-free contact. Standards and directives: EN IEC 61000-6-2; EN IEC 61000-6-4; EN IEC 62368-1; RoHS Directives 2011/65/EU and 2015/863/EU; REACH Regulation (EC) No. 1907/2006.