XCSE2480W024VAA - Cabur - Single-/two-phase power supply input 180-550Vac / output 24Vdc 10A

<div class="container-fluid"> <h3>CSE Easy Power Line 1-2-phase DIN-rail power supply for demanding 24 Vdc distribution</h3> <p>The CSE Easy Power Line is the new CSE family created to deliver reliable DC power for automation panels and standard industrial machines. Designed for DIN-rail mounting, it helps panel builders standardize the power section with a wide input window, clear diagnostics, and protection behavior suitable for continuous operation.</p> <h4>Wide input flexibility for 230 Vac and 400 Vac infrastructures</h4> <p>This 1-2-phase switching power supply supports AC input from 180 to 550 Vac at 47–63 Hz and also accepts 254–780 Vdc. With an input rated voltage covering 1-2x 230–400–500 Vac, it fits cabinets supplied by different AC networks while keeping one consistent platform. Power factor is specified above 0.7 and the inrush peak current is 50 A at 400 Vac.</p> <h4>Stable 24 Vdc output for high-current loads</h4> <ul> <li>Regulated output 24 Vdc with adjustment range 24–28 Vdc</li> <li>Continuous current 20.0 A for PLC I/O, sensors, actuators, relays, and auxiliary DC circuits</li> <li>Ripple at nominal ratings 150 mVpp and hold-up time 16 ms at 230 Vac and 400 Vac</li> <li>Efficiency 91.5% at 230 Vac and 92% at 400 Vac to limit cabinet heat</li> </ul> <h4>Diagnostics, alarm contact, and protection technologies</h4> <p>Monitoring is simplified through a DC OK LED and a dry alarm contact (max 1 A). The power supply provides overload limiting at 30 A for more than 3 s and short-circuit peak current up to 50 A for 10 s. Redundant parallel concepts can be implemented using an external ORing diode. With IP20 protection degree, 3 kVac input/output isolation, and an operating temperature range of -30°C to +70°C with derating above 50°C, the CSE Easy Power Line supports robust 24 Vdc distribution in industrial control cabinets.</p> </div> :contentReference[oaicite:1]{index=1} <div class="container-fluid"> <h3>CSE Easy Power Line 1-2-phase DIN-rail power supply for demanding 24 Vdc distribution</h3> <p>The CSE Easy Power Line is the new CSE family created to deliver reliable DC power for automation panels and standard industrial machines. Designed for DIN-rail mounting, it helps panel builders standardize the power section with a wide input window, clear diagnostics, and protection behavior suitable for continuous operation.</p> <h4>Wide input flexibility for 230 Vac and 400 Vac infrastructures</h4> <p>This 1-2-phase switching power supply supports AC input from 180 to 550 Vac at 47–63 Hz and also accepts 254–780 Vdc. With an input rated voltage covering 1-2x 230–400–500 Vac, it fits cabinets supplied by different AC networks while keeping one consistent platform. Power factor is specified above 0.7 and the inrush peak current is 50 A at 400 Vac.</p> <h4>Stable 24 Vdc output for high-current loads</h4> <ul> <li>Regulated output 24 Vdc with adjustment range 24–28 Vdc</li> <li>Continuous current 20.0 A for PLC I/O, sensors, actuators, relays, and auxiliary DC circuits</li> <li>Ripple at nominal ratings 150 mVpp and hold-up time 16 ms at 230 Vac and 400 Vac</li> <li>Efficiency 91.5% at 230 Vac and 92% at 400 Vac to limit cabinet heat</li> </ul> <h4>Diagnostics, alarm contact, and protection technologies</h4> <p>Monitoring is simplified through a DC OK LED and a dry alarm contact (max 1 A). The power supply provides overload limiting at 30 A for more than 3 s and short-circuit peak current up to 50 A for 10 s. Redundant parallel concepts can be implemented using an external ORing diode. With IP20 protection degree, 3 kVac input/output isolation, and an operating temperature range of -30°C to +70°C with derating above 50°C, the CSE Easy Power Line supports robust 24 Vdc distribution in industrial control cabinets.</p> </div> :contentReference[oaicite:1]{index=1}