XCSE3480W048VAB - Cabur - Three-phase power supply input 400-500Vac / output 48Vdc 10A

<div class="container-fluid"> <h3>CSE Easy Power Line 3-phase DIN-rail PSU for stable 48 Vdc distribution</h3> <p>The CSE Easy Power Line is the new CSE family engineered for dependable DC power in automation panels and standard industrial machines. This 3-phase DIN-rail switching power supply delivers regulated 48 Vdc for drives, actuators, and control auxiliaries, while keeping installation and monitoring straightforward for panel builders.</p> <h4>3-phase AC input plus DC bus capability</h4> <p>Rated for 3x 400–500 Vac, the unit operates over 340–550 Vac at 47–63 Hz and also supports 500–600 Vdc. The specified current consumption is 0.8 A at 400 Vac, inrush peak current 22 A, and power factor 0.76.</p> <h4>Adjustable 48 Vdc output and fault behavior</h4> <ul> <li>48 Vdc output (±1%), adjustable 40.5–55.5 Vdc</li> <li>10 A continuous at 50°C, overload limiting 15 A (max 26 A constant current)</li> <li>Ripple 200 mVpp and hold-up time 10 ms at 400 Vac</li> <li>Short-circuit peak 40 A in HICCUP mode (400 ms on / 800 ms off)</li> </ul> <h4>Monitoring, alarm contact, and redundancy concepts</h4> <p>DC OK and Stand-by LEDs provide fast diagnostics. A dry alarm contact (max 1 A at 24 Vdc) is available when output is above 26 Vdc for remote signaling. Parallel connection is possible, and redundant parallel operation can be implemented using an external ORing diode. With IP20 protection degree, 3 kVac input/output isolation and -20°C to +70°C operating range (derating above 50°C), the CSE Easy Power Line supports robust 48 Vdc power distribution in industrial cabinets.</p> </div> :contentReference[oaicite:18]{index=18} <div class="container-fluid"> <h3>CSE Easy Power Line 3-phase DIN-rail PSU for stable 48 Vdc distribution</h3> <p>The CSE Easy Power Line is the new CSE family engineered for dependable DC power in automation panels and standard industrial machines. This 3-phase DIN-rail switching power supply delivers regulated 48 Vdc for drives, actuators, and control auxiliaries, while keeping installation and monitoring straightforward for panel builders.</p> <h4>3-phase AC input plus DC bus capability</h4> <p>Rated for 3x 400–500 Vac, the unit operates over 340–550 Vac at 47–63 Hz and also supports 500–600 Vdc. The specified current consumption is 0.8 A at 400 Vac, inrush peak current 22 A, and power factor 0.76.</p> <h4>Adjustable 48 Vdc output and fault behavior</h4> <ul> <li>48 Vdc output (±1%), adjustable 40.5–55.5 Vdc</li> <li>10 A continuous at 50°C, overload limiting 15 A (max 26 A constant current)</li> <li>Ripple 200 mVpp and hold-up time 10 ms at 400 Vac</li> <li>Short-circuit peak 40 A in HICCUP mode (400 ms on / 800 ms off)</li> </ul> <h4>Monitoring, alarm contact, and redundancy concepts</h4> <p>DC OK and Stand-by LEDs provide fast diagnostics. A dry alarm contact (max 1 A at 24 Vdc) is available when output is above 26 Vdc for remote signaling. Parallel connection is possible, and redundant parallel operation can be implemented using an external ORing diode. With IP20 protection degree, 3 kVac input/output isolation and -20°C to +70°C operating range (derating above 50°C), the CSE Easy Power Line supports robust 48 Vdc power distribution in industrial cabinets.</p> </div> :contentReference[oaicite:18]{index=18}