XCSE3480W072VAB - Cabur - Three-phase power supply input 400-500Vac / output 72Vdc 6.6A

<div class="container-fluid"> <h3>CSE Easy Power Line 3-phase DIN-rail PSU for regulated 72 Vdc loads</h3> <p>The CSE Easy Power Line is the new CSE family designed for robust DC distribution in automation panels and standard industrial machines. This 3-phase DIN-rail switching power supply delivers regulated 72 Vdc, supporting applications that require higher DC voltage while keeping monitoring and protection aligned with control cabinet needs.</p> <h4>3-phase AC input and DC bus support</h4> <p>The unit is rated for 3x 400–500 Vac and operates over 340–550 Vac at 47–63 Hz. It also supports 500–600 Vdc. Current consumption is specified at 0.8 A (400 Vac), inrush peak current 22 A, and power factor 0.76.</p> <h4>72 Vdc output with adjustment range</h4> <ul> <li>72 Vdc nominal output, adjustable 60–81 Vdc</li> <li>6.6 A continuous at 50°C, overload limiting 11 A (max 22.5 A constant current)</li> <li>Ripple 200 mVpp and hold-up time 10 ms at 400 Vac</li> <li>Short-circuit peak 20 A in HICCUP mode (400 ms on / 800 ms off)</li> </ul> <h4>Monitoring, alarms, and redundancy</h4> <p>DC OK and Stand-by LEDs provide immediate status indication. A dry alarm contact (max 1 A at 24 Vdc) is available when output is above 68.4 Vdc for remote signaling. Parallel operation is possible, and redundant parallel operation can be implemented using an external ORing diode. With IP20 protection degree, 3 kVac input/output isolation (output not SELV) and -20°C to +70°C operating range (derating above 50°C), the CSE Easy Power Line supports stable 72 Vdc distribution in industrial cabinets.</p> </div> :contentReference[oaicite:36]{index=36} <div class="container-fluid"> <h3>CSE Easy Power Line 3-phase DIN-rail PSU for regulated 72 Vdc loads</h3> <p>The CSE Easy Power Line is the new CSE family designed for robust DC distribution in automation panels and standard industrial machines. This 3-phase DIN-rail switching power supply delivers regulated 72 Vdc, supporting applications that require higher DC voltage while keeping monitoring and protection aligned with control cabinet needs.</p> <h4>3-phase AC input and DC bus support</h4> <p>The unit is rated for 3x 400–500 Vac and operates over 340–550 Vac at 47–63 Hz. It also supports 500–600 Vdc. Current consumption is specified at 0.8 A (400 Vac), inrush peak current 22 A, and power factor 0.76.</p> <h4>72 Vdc output with adjustment range</h4> <ul> <li>72 Vdc nominal output, adjustable 60–81 Vdc</li> <li>6.6 A continuous at 50°C, overload limiting 11 A (max 22.5 A constant current)</li> <li>Ripple 200 mVpp and hold-up time 10 ms at 400 Vac</li> <li>Short-circuit peak 20 A in HICCUP mode (400 ms on / 800 ms off)</li> </ul> <h4>Monitoring, alarms, and redundancy</h4> <p>DC OK and Stand-by LEDs provide immediate status indication. A dry alarm contact (max 1 A at 24 Vdc) is available when output is above 68.4 Vdc for remote signaling. Parallel operation is possible, and redundant parallel operation can be implemented using an external ORing diode. With IP20 protection degree, 3 kVac input/output isolation (output not SELV) and -20°C to +70°C operating range (derating above 50°C), the CSE Easy Power Line supports stable 72 Vdc distribution in industrial cabinets.</p> </div> :contentReference[oaicite:36]{index=36}